Reply
 
Thread Tools Display Modes
  #1  
Old 01-14-2007, 04:49 PM
tb38 tb38 is offline
Junior Member
 
Join Date: Jan 2007
Location: France
Posts: 18
Thanks: 0
Thanked 0 Times in 0 Posts
Default / was not properly dismounted
Hello,

For my first post in the forum, i am not sure that it is the good section, but it is about my laptop :

when i turn it on, i have this message in the boot screen :

...
Trying to mount root from ufs:/dev/ad0s1a
/ was not properly dismounted
mount pending error: blocks 8 files 2
ad0: TIMEOUT - READ_DMA retrying (1 retry left) LBA=6410431
ad0: TIMEOUT - READ_DMA retrying (0 retries left) LBA=6410431
ad0: FAILURE - READ_DMA timed out LBA=6410431
ad0: TIMEOUT - READ_DMA retrying (1 retry left) LBA=6410431
ad0: TIMEOUT - READ_DMA retrying (0 retries left) LBA=6410431
ad0: FAILURE - READ_DMA timed out LBA=6410431
ad0: TIMEOUT - READ_DMA retrying (1 retry left) LBA=6410432
ad0: TIMEOUT - READ_DMA retrying (0 retries left) LBA=6410432
ad0: FAILURE - READ_DMA timed out LBA=6410432
ad0: TIMEOUT - READ_DMA retrying (1 retry left) LBA=6410463
ad0: TIMEOUT - READ_DMA retrying (0 retries left) LBA=6410463
ad0: FAILURE - READ_DMA timed out LBA=6410463
ad0: TIMEOUT - READ_DMA retrying (1 retry left) LBA=6410464
ad0: TIMEOUT - READ_DMA retrying (0 retries left) LBA=6410464
ad0: FAILURE - READ_DMA timed out LBA=6410464
/: reload pending error: blocks 8 files 2
WARNING: / was not properly dismounted
...

i take these words in /var/log/messages.
it is not the first time i see it. the last time, i reinstall all PCBSD.
This error don't stop the start of PCBSD.
What about these messages ? is somebody have an idea ?

thanks


PS : excuse me for my english ops:
Reply With Quote
  #2  
Old 01-14-2007, 06:04 PM
dracheflieger dracheflieger is offline
Senior Member
 
Join Date: May 2006
Location: Greater State of Northern Kaliforneea
Posts: 2,880
Thanks: 0
Thanked 0 Times in 0 Posts
Default
It is a series of Direct Memory Access time outs while trying to read Logical Block Addresses. It could be caused by something screwy on your hard drive but I don't know why it isn't running fsck (maybe it is and you did not post it). You can open konsole (KMenu -> System -> konsole) su to root and
Code:
shutdown now
and once in single user mode enter
Code:
fsck -y
and that will check your hard drive, answering 'yes' to every prompt. Once that finishes type in
Code:
reboot now
and see if that helps.

Don't apologize for your English, it is much better than my French
Reply With Quote
  #3  
Old 01-14-2007, 07:02 PM
tb38 tb38 is offline
Junior Member
 
Join Date: Jan 2007
Location: France
Posts: 18
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Thank you Dracheflieger for your help.

yes, fsck is launch automaticaly at startup.
i make your instructions : shutdown now in konsole, fsck -y.
i see the same words that in the boot sequence, like this :

pcbsd-1110# fsck
** /dev/ad0s1a (NO WRITE)
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames

CANNOT READ BLK: 6410368
UNEXPECTED SOFT UPDATE INCONSISTENCY

CONTINUE? [yn] y

THE FOLLOWING DISK SECTORS COULD NOT BE READ: 6410369,
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
LINK COUNT FILE I=781205 OWNER=thierry MODE=0
SIZE=0 MTIME=Jan 14 19:50 2007 COUNT 0 SHOULD BE -1
ADJUST? no

LINK COUNT FILE I=781519 OWNER=thierry MODE=0
SIZE=0 MTIME=Jan 14 19:50 2007 COUNT 0 SHOULD BE -1
ADJUST? no

LINK COUNT FILE I=781530 OWNER=thierry MODE=0
SIZE=0 MTIME=Jan 14 19:50 2007 COUNT 0 SHOULD BE -1
ADJUST? no

LINK COUNT FILE I=781541 OWNER=thierry MODE=0
SIZE=0 MTIME=Jan 14 19:50 2007 COUNT 0 SHOULD BE -1
ADJUST? no

** Phase 5 - Check Cyl groups
FREE BLK COUNT(S) WRONG IN SUPERBLK
SALVAGE? no

SUMMARY INFORMATION BAD
SALVAGE? no

ALLOCATED FRAGS 3716718-3716719 MARKED FREE
ALLOCATED FRAG 3716823 MARKED FREE
ALLOCATED FRAG 3716935 MARKED FREE
ALLOCATED FRAG 3716990 MARKED FREE
ALLOCATED FRAG 3717031 MARKED FREE
BLK(S) MISSING IN BIT MAPS
SALVAGE? no

120486 files, 1463199 used, 2781188 free (3972 frags, 347152 blocks, 0.1% fragmentation)
pcbsd-1110#


i have always the problem at reboot

i think the errors are see, but not repair.

is fsck works as chkdsk in DOS ?
i don't see it with man fsck.

these errors dissapear when i reinstall PCBSD but appear after different time.
is the HDD out of order ? :twisted:
Reply With Quote
  #4  
Old 01-14-2007, 07:21 PM
TerryP TerryP is offline
Senior Member
 
Join Date: Nov 2005
Location: Ga. USofA
Posts: 7,906
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via ICQ to TerryP Send a message via AIM to TerryP Send a message via Yahoo to TerryP
Default
Yes fsck is a *nix equalivulent of scandisk and chkdsk.
Reply With Quote
  #5  
Old 01-14-2007, 07:32 PM
dracheflieger dracheflieger is offline
Senior Member
 
Join Date: May 2006
Location: Greater State of Northern Kaliforneea
Posts: 2,880
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Very strange...OWNER=thierry

thierry is one of the major contributors on the FreeBSD lists. But your posts show 'no' when asked to fix. It may be that there is something wrong with your hard drive. Maybe going to theFreeBSD lists and posting there would bring a response from Mr thierry ?
Reply With Quote
  #6  
Old 01-15-2007, 07:49 AM
g0lem g0lem is offline
Senior Member
 
Join Date: Apr 2006
Posts: 572
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via Yahoo to g0lem
Default
Originally Posted by tb38
CANNOT READ BLK: 6410368
UNEXPECTED SOFT UPDATE INCONSISTENCY

CONTINUE? [yn] y

THE FOLLOWING DISK SECTORS COULD NOT BE READ: 6410369,
my guess is either you got yourself some bad sectors or your ide cable isn't properly connected -- it happened to me; (or the power supply, for that matter)

is it an old hdd? or did it 'suffer' some fallings/its/... ?
Reply With Quote
  #7  
Old 01-15-2007, 12:40 PM
rodonn rodonn is offline
Senior Member
 
Join Date: Jun 2006
Posts: 1,178
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Originally Posted by dracheflieger
Very strange...OWNER=thierry

thierry is one of the major contributors on the FreeBSD lists. But your posts show 'no' when asked to fix. It may be that there is something wrong with your hard drive. Maybe going to theFreeBSD lists and posting there would bring a response from Mr thierry ?
Maybe wait to find out if Tb38's name isn't Thierry? It's not an uncommon French name...
Reply With Quote
  #8  
Old 01-15-2007, 12:58 PM
dracheflieger dracheflieger is offline
Senior Member
 
Join Date: May 2006
Location: Greater State of Northern Kaliforneea
Posts: 2,880
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Can't argue that...had to weed out all the French returns from a Google (+freebsd -france) and then realized I could just search the lists.
Reply With Quote
  #9  
Old 01-15-2007, 12:58 PM
dracheflieger dracheflieger is offline
Senior Member
 
Join Date: May 2006
Location: Greater State of Northern Kaliforneea
Posts: 2,880
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Can't argue that...had to wee out all the French returns from a Google (+freebsd -france) and then realized I could just search the lists.
Reply With Quote
  #10  
Old 01-15-2007, 04:05 PM
tb38 tb38 is offline
Junior Member
 
Join Date: Jan 2007
Location: France
Posts: 18
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Originally Posted by dracheflieger
Very strange...OWNER=thierry

thierry is one of the major contributors on the FreeBSD lists. But your posts show 'no' when asked to fix. It may be that there is something wrong with your hard drive. Maybe going to the FreeBSD lists and posting there would bring a response from Mr thierry ?
Hello,
Well, it is an example which illustrate why many time as gone before my inscription in an english forum : i begin to understand what you mean ( +/- 20 minutes...) ops: ... and i am not sure...
I'am not the Thierry who " is one of the major contributors on the FreeBSD lists ".


Originally Posted by g0lem
my guess is either you got yourself some bad sectors or your ide cable isn't properly connected -- it happened to me; (or the power supply, for that matter)

is it an old hdd? or did it 'suffer' some fallings/its/... ?
it is a laptop, no easy to open. 4 years of hard duty... :evil:


Originally Posted by rodonn
Maybe wait to find out if Tb38's name isn't Thierry? It's not an uncommon French name... Very Happy
In French, we say : " there is many donkey which the name is Martin ".
( I am sure that Charles will correct these words if there is a similar sentence in English ).
And yes, my name is Thierry

Originally Posted by dracheflieger
Can't argue that...had to wee out all the French returns from a Google (+freebsd -france) and then realized I could just search the lists.
Sorry, i don't understand...
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WARNING: /mnt was not properly dismounted solomonml FreeBSD Help 0 01-15-2010 08:14 AM
Cant get gnome2 2.20.1 installed properly - can anybody help mgreen The Lounge 15 11-27-2007 04:20 PM
[HELP] Using aMule with NAT and PF properly set! CUNY General Support 11 01-26-2007 03:30 PM
Drive not properly dismounted tonyc Drives 8 08-21-2006 10:12 PM
linux_devtools not installing properly neighborlee General Questions 7 02-13-2006 04:16 PM


All times are GMT. The time now is 09:18 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Copyright 2005-2010, The PC-BSD Project. PC-BSD and the PC-BSD logo are registered trademarks of iXsystems.
All other content is freely available for sharing under the terms of the Creative Commons Attribution License.