Reply
 
Thread Tools Display Modes
  #1  
Old 08-31-2006, 02:07 PM
unrealnet unrealnet is offline
Junior Member
 
Join Date: Aug 2006
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default Problems with nvidia drivers
First of all I am completely new to the *BSD systems. I have experience with Linux but it seems that BSD is quite different for me.


So now on the problem.
This morning i installed PC-BSD 1.2.
I have Nforce4 motherboard with GeForce 6100 video card integrated on the board. In Linux it work flawlessly but here in PCBSD there is some strange problem which i found that is not only on my system when i did a search through the forums.

This is what is the problem.

----- /var/log/messages -----
Quote:
Aug 31 16:50:11 PCBSD kernel: nvidia0: <GeForce 6100> mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 11 at device 5.0 on pci0
Aug 31 16:50:11 PCBSD kernel: nvidia0: [GIANT-LOCKED]

------ some lines cut ------

Aug 31 16:51:28 PCBSD kdm-bin[880]: X server for display :0 terminated unexpectedly
Aug 31 16:51:29 PCBSD kernel: NVRM: RmInitAdapter failed! (0x31:0xffffffff:958)
Aug 31 16:51:29 PCBSD kernel: nvidia0: NVRM: rm_init_adapter() failed!

Aug 31 16:51:29 PCBSD kdm-bin: :0[1080]: IO Error in XOpenDisplay
Aug 31 16:51:29 PCBSD kdm-bin[880]: X server for display :0 terminated unexpectedly
Aug 31 16:51:29 PCBSD kdm-bin[880]: Unable to fire up local display :0; disabling.
I tried all of the latest drivers from pbidir ( i uninstall the old, before installing new.).
Then I tried the "portinstall nvidia-driver".
Then the latest 3 versions of the drivers from the nvidia.com site.
After this i downloaded the 1.3beta kernel which i found in the forum.
Then all the steps above ... and still the same error... What could the problem be ? I think i did everything right but i don't know... Will it work if i move to PC-BSD 1.1 ?

Thanks for all in advance.
Reply With Quote
  #2  
Old 08-31-2006, 07:46 PM
Apatewna Apatewna is offline
Senior Member
 
Join Date: May 2006
Location: Greece
Posts: 1,142
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via ICQ to Apatewna Send a message via MSN to Apatewna Send a message via Yahoo to Apatewna
Default
If your BIOS has an "AGP aperture size" you can try setting it to a size twice the video ram.
Pay attention to the IRQ listing just before BSD starts up. Make sure that the VGA doesn't share an IRQ with some other device. You can do this by selecting "Non PnP operating system" in BIOS, so that the BIOS assigns IRQs not the OS.

Please verify that you have
Code:
Driver "nvidia"
in you /etc/X11/XF86Config just to be sure
__________________
RTFM and STFW before anything bad happens

Please read and UNDERSTAND these pages before posting:
http://www.catb.org/~esr/faqs/smart-questions.html
http://en.wikipedia.org/wiki/Netiquette
Reply With Quote
  #3  
Old 08-31-2006, 08:32 PM
unrealnet unrealnet is offline
Junior Member
 
Join Date: Aug 2006
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default
I haven't tried it yet because i have some work and i cannot reboot, but why should i set anything related to AGP as my video is PCI-Express ? Tomorrow morning i will try it and tell results.

And in the config it is nvidia. Btw why XFree86 ? My system uses xorg.conf ?!
Reply With Quote
  #4  
Old 08-31-2006, 08:58 PM
dracheflieger dracheflieger is offline
Senior Member
 
Join Date: May 2006
Location: Greater State of Northern Kaliforneea
Posts: 2,880
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Originally Posted by unrealnet
And in the config it is nvidia. Btw why XFree86 ? My system uses xorg.conf ?!
Maybe that's a problem. If you installed the latest nVidia drivers off of their site then rename your /etc/X11/xorg.conf to something else and run the nvidia-xconfig program that installs with the drivers. Your system will then use the newly created /etc/X11/XF86Config file. If you lose some mouse button functions (or video resolutions) then amend the new file with settings out of the old /etc/X11/xorg.conf file.
Reply With Quote
  #5  
Old 09-01-2006, 08:20 AM
unrealnet unrealnet is offline
Junior Member
 
Join Date: Aug 2006
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default
It seems that it is some kind of serious irq problem.

Quote:
Sep 1 11:14:06 PCBSD syslogd: kernel boot file is /boot/kernel/kernel
Sep 1 11:14:06 PCBSD kernel: Copyright (c) 1992-2006 The FreeBSD Project.
Sep 1 11:14:06 PCBSD kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Sep 1 11:14:06 PCBSD kernel: The Regents of the University of California. All rights reserved.
Sep 1 11:14:06 PCBSD kernel: FreeBSD 6.1-RELEASE-p3 #0: Mon Aug 21 20:49:58 EEST 2006
Sep 1 11:14:06 PCBSD kernel: root@thinkpad.raidon.local:/usr/obj/usr/src/sys/PCBSDv1.3b1
Sep 1 11:14:06 PCBSD kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Sep 1 11:14:06 PCBSD kernel: CPU: AMD Sempron(tm) Processor 2500+ (1406.41-MHz 686-class CPU)
Sep 1 11:14:06 PCBSD kernel: Origin = "AuthenticAMD" Id = 0x20fc2 Stepping = 2
Sep 1 11:14:06 PCBSD kernel: Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE, CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,M MX,FXSR,SSE,SSE2>
Sep 1 11:14:06 PCBSD kernel: Features2=0x1<SSE3>
Sep 1 11:14:06 PCBSD kernel: AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow +,3DNow>
Sep 1 11:14:06 PCBSD kernel: AMD Features2=0x1<LAHF>
Sep 1 11:14:06 PCBSD kernel: real memory = 469434368 (447 MB)
Sep 1 11:14:06 PCBSD kernel: avail memory = 441589760 (421 MB)
Sep 1 11:14:06 PCBSD kernel: MPTable: <TEMPLATE ETEMPLATE >
Sep 1 11:14:06 PCBSD kernel: ioapic0: Assuming intbase of 0
Sep 1 11:14:06 PCBSD kernel: ioapic0 <Version 1.1> irqs 0-23 on motherboard
Sep 1 11:14:06 PCBSD kernel: kbd1 at kbdmux0
Sep 1 11:14:06 PCBSD kernel: cpu0 on motherboard
Sep 1 11:14:06 PCBSD kernel: pcib0: <Host to PCI bridge> pcibus 0 on motherboard
Sep 1 11:14:06 PCBSD kernel: pir0: <PCI Interrupt Routing Table: 15 Entries> on motherboard
Sep 1 11:14:06 PCBSD kernel: pci0: <PCI bus> on pcib0
Sep 1 11:14:06 PCBSD kernel: pci0: <memory, RAM> at device 0.0 (no driver attached)
Sep 1 11:14:06 PCBSD kernel: pci0: <memory, RAM> at device 0.1 (no driver attached)
Sep 1 11:14:06 PCBSD kernel: pci0: <memory, RAM> at device 0.2 (no driver attached)
Sep 1 11:14:06 PCBSD kernel: pci0: <memory, RAM> at device 0.3 (no driver attached)
Sep 1 11:14:06 PCBSD kernel: pci0: <memory, RAM> at device 0.4 (no driver attached)
Sep 1 11:14:06 PCBSD kernel: pci0: <memory, RAM> at device 0.5 (no driver attached)
Sep 1 11:14:06 PCBSD kernel: pci0: <memory, RAM> at device 0.6 (no driver attached)
Sep 1 11:14:06 PCBSD kernel: pci0: <memory, RAM> at device 0.7 (no driver attached)
Sep 1 11:14:06 PCBSD kernel: pcib1: <PCIBIOS PCI-PCI bridge> at device 2.0 on pci0
Sep 1 11:14:06 PCBSD kernel: pci1: <PCI bus> on pcib1
Sep 1 11:14:06 PCBSD kernel: pcib2: <PCIBIOS PCI-PCI bridge> at device 3.0 on pci0
Sep 1 11:14:06 PCBSD kernel: pci2: <PCI bus> on pcib2
Sep 1 11:14:06 PCBSD kernel: pcib3: <PCIBIOS PCI-PCI bridge> at device 4.0 on pci0
Sep 1 11:14:06 PCBSD kernel: pci3: <PCI bus> on pcib3
Sep 1 11:14:06 PCBSD kernel: nvidia0: <GeForce 6100> mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 11 at device 5.0 on pci0
Sep 1 11:14:06 PCBSD kernel: nvidia0: [GIANT-LOCKED]
Sep 1 11:14:06 PCBSD kernel: pci0: <memory, RAM> at device 9.0 (no driver attached)
Sep 1 11:14:06 PCBSD kernel: isab0: <PCI-ISA bridge> at device 10.0 on pci0
Sep 1 11:14:06 PCBSD kernel: isa0: <ISA bus> on isab0
Sep 1 11:14:06 PCBSD kernel: pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
Sep 1 11:14:06 PCBSD kernel: ohci0: <OHCI (generic) USB controller> mem 0xfebde000-0xfebdefff irq 11 at device 11.0 on pci0
Sep 1 11:14:06 PCBSD kernel: ohci0: [GIANT-LOCKED]
Sep 1 11:14:06 PCBSD kernel: usb0: OHCI version 1.0, legacy support
Sep 1 11:14:06 PCBSD kernel: usb0: <OHCI (generic) USB controller> on ohci0
Sep 1 11:14:06 PCBSD kernel: usb0: USB revision 1.0
Sep 1 11:14:06 PCBSD kernel: uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Sep 1 11:14:06 PCBSD kernel: uhub0: 8 ports with 8 removable, self powered
Sep 1 11:14:06 PCBSD kernel: ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebdfc00-0xfebdfcff irq 11 at device 11.1 on pci0
Sep 1 11:14:06 PCBSD kernel: ehci0: [GIANT-LOCKED]
Sep 1 11:14:06 PCBSD kernel: usb1: EHCI version 1.0
Sep 1 11:14:06 PCBSD kernel: usb1: companion controller, 8 ports each: usb0
Sep 1 11:14:06 PCBSD kernel: usb1: <EHCI (generic) USB 2.0 controller> on ehci0
Sep 1 11:14:06 PCBSD kernel: usb1: USB revision 2.0
Sep 1 11:14:06 PCBSD kernel: uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
Sep 1 11:14:06 PCBSD kernel: uhub1: 8 ports with 8 removable, self powered
Sep 1 11:14:06 PCBSD kernel: atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 13.0 on pci0
Sep 1 11:14:06 PCBSD kernel: ata0: <ATA channel 0> on atapci0
Sep 1 11:14:06 PCBSD kernel: ata1: <ATA channel 1> on atapci0
Sep 1 11:14:06 PCBSD kernel: atapci1: <nVidia nForce MCP51 SATA300 controller> port 0xf80-0xf87,0xf00-0xf03,0xe80-0xe87,0xe00-0xe03,0xe000-0xe00f mem 0xfebdd000-0xfebddfff irq 10 at device 14.0 on pci0
Sep 1 11:14:06 PCBSD kernel: ata2: <ATA channel 0> on atapci1
Sep 1 11:14:06 PCBSD kernel: ata3: <ATA channel 1> on atapci1
Sep 1 11:14:06 PCBSD kernel: pcib4: <PCIBIOS PCI-PCI bridge> at device 16.0 on pci0
Sep 1 11:14:06 PCBSD kernel: pci4: <PCI bus> on pcib4
Sep 1 11:14:06 PCBSD kernel: rl0: <RealTek 8139 10/100BaseTX> port 0xc800-0xc8ff mem 0xfaaffc00-0xfaaffcff irq 11 at device 8.0 on pci4
Sep 1 11:14:06 PCBSD kernel: miibus0: <MII bus> on rl0
Sep 1 11:14:06 PCBSD kernel: rlphy0: <RealTek internal media interface> on miibus0
Sep 1 11:14:06 PCBSD kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Sep 1 11:14:06 PCBSD kernel: rl0: Ethernet address: 00:02:44:33:d1:c0
Sep 1 11:14:06 PCBSD kernel: pcm0: <nVidia nForce 410 MCP> port 0xd800-0xd8ff,0xd400-0xd4ff mem 0xfebdc000-0xfebdcfff irq 11 at device 16.2 on pci0
Sep 1 11:14:06 PCBSD kernel: pcm0: <Avance Logic ALC850 AC97 Codec>
Sep 1 11:14:06 PCBSD kernel: pci0: <bridge> at device 20.0 (no driver attached)
Sep 1 11:14:06 PCBSD kernel: pmtimer0 on isa0
Sep 1 11:14:06 PCBSD kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
Sep 1 11:14:06 PCBSD kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Sep 1 11:14:06 PCBSD kernel: kbd0 at atkbd0
Sep 1 11:14:06 PCBSD kernel: atkbd0: [GIANT-LOCKED]
Sep 1 11:14:06 PCBSD kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Sep 1 11:14:06 PCBSD kernel: psm0: [GIANT-LOCKED]
Sep 1 11:14:06 PCBSD kernel: psm0: model IntelliMouse, device ID 3
Sep 1 11:14:06 PCBSD kernel: fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Sep 1 11:14:06 PCBSD kernel: fdc0: [FAST]
Sep 1 11:14:06 PCBSD kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
Sep 1 11:14:06 PCBSD kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Sep 1 11:14:06 PCBSD kernel: ppc0: FIFO with 16/16/9 bytes threshold
Sep 1 11:14:06 PCBSD kernel: ppbus0: <Parallel port bus> on ppc0
Sep 1 11:14:06 PCBSD kernel: plip0: <PLIP network interface> on ppbus0
Sep 1 11:14:06 PCBSD kernel: lpt0: <Printer> on ppbus0
Sep 1 11:14:06 PCBSD kernel: lpt0: Interrupt-driven port
Sep 1 11:14:06 PCBSD kernel: ppi0: <Parallel I/O> on ppbus0
Sep 1 11:14:06 PCBSD kernel: sc0: <System console> at flags 0x100 on isa0
Sep 1 11:14:06 PCBSD kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Sep 1 11:14:06 PCBSD kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
Sep 1 11:14:06 PCBSD kernel: sio0: type 16550A
Sep 1 11:14:06 PCBSD kernel: sio1: configured irq 3 not in bitmap of probed irqs 0
Sep 1 11:14:06 PCBSD kernel: sio1: port may not be enabled
Sep 1 11:14:06 PCBSD kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Sep 1 11:14:06 PCBSD kernel: unknown: <PNP0c01> can't assign resources (memory)
Sep 1 11:14:06 PCBSD kernel: unknown: <PNP0700> can't assign resources (port)
Sep 1 11:14:06 PCBSD kernel: unknown: <PNP0401> can't assign resources (port)
Sep 1 11:14:06 PCBSD kernel: unknown: <PNP0c02> can't assign resources (port)
Sep 1 11:14:06 PCBSD kernel: unknown: <PNP0c02> can't assign resources (port)
Sep 1 11:14:06 PCBSD kernel: unknown: <PNP0303> can't assign resources (port)
Sep 1 11:14:06 PCBSD kernel: unknown: <PNP0f13> can't assign resources (irq)
Sep 1 11:14:06 PCBSD kernel: unknown: <PNP0501> can't assign resources (port)
Sep 1 11:14:06 PCBSD kernel: Timecounter "TSC" frequency 1406408160 Hz quality 800
Sep 1 11:14:06 PCBSD kernel: Timecounters tick every 1.000 msec
Sep 1 11:14:06 PCBSD kernel: ad0: 156334MB <Maxtor 6L160P0 BAH41G10> at ata0-master UDMA133
Sep 1 11:14:06 PCBSD kernel: acd0: DVDR <HL-DT-ST DVDRAM GSA-4167B/DL10> at ata1-master UDMA33
Sep 1 11:14:06 PCBSD kernel: Trying to mount root from ufs:/dev/ad0s3a
Sep 1 11:14:07 PCBSD kernel: rl0: link state changed to UP
Sep 1 11:14:07 PCBSD kernel: cd0 at ata1 bus 0 target 0 lun 0
Sep 1 11:14:07 PCBSD kernel: cd0: <HL-DT-ST DVDRAM GSA-4167B DL10> Removable CD-ROM SCSI-0 device
Sep 1 11:14:07 PCBSD kernel: cd0: 33.000MB/s transfers
Sep 1 11:14:07 PCBSD kernel: cd0: Attempt to query device size failed: NOT READY, Medium not present
From what i see here i think it tries to put Video, USB controller, NIC and one more thing which i do not know what it is on IRQ11 ...

In the BIOS i could not find anything related to PNP OS ( AsRock K8NF4G-SATA2 motherboard).

Is it possible to fix it by recompiling the kernel and if it is where can i find some good guide on "Recompiling BSD kernel for dummies"
Reply With Quote
  #6  
Old 09-01-2006, 10:24 AM
root.mainframe root.mainframe is offline
Junior Member
 
Join Date: Nov 2005
Location: /root
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
Default
I think I had the same issue, please see this topic - http://forums.pcbsd.org/viewtopic.php?t=5069
Reply With Quote
  #7  
Old 01-16-2007, 01:27 PM
X-Ray X-Ray is offline
Junior Member
 
Join Date: Jan 2007
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Guys, I'm also a new one in PC-BSD. I've looked in the topic recomended before and nothing helped.
My PC:
Sempron 3000+
int GF6100 128Mb

When i changed "vga" to "nv" X refused to start. When I installed NVIDIA-FreeBSD-x86-1.0-9746.tar.gz and also nothin' worked.
XF86Config is configured with nvidia-xconfig.
NVRM: RnInitAdapter Failed! (0x31:0xffffffff:946)
nvidia0: NVRN rm_init_adapter() failed!
NVIDIA: could not open the device file /dev/nvidia0 (input/output error)
.....
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found

Need immediate support
Reply With Quote
  #8  
Old 01-16-2007, 02:04 PM
dracheflieger dracheflieger is offline
Senior Member
 
Join Date: May 2006
Location: Greater State of Northern Kaliforneea
Posts: 2,880
Thanks: 0
Thanked 0 Times in 0 Posts
Default
How about some 'immediate' advice...if you need nVidia support, maybe you should be posting in the nVidia forums ;-)

Go into single user, run X -configure, if that doesn't work then replace the nv with vesa and it should get you to a desktop. As to why nVidia's drivers wont work? I can't say. Did you compile the /usr/ports/x11/nvidia-xconfig from ports or use the one that came with the file? I've compiled from ports for a 6200, a 5200 and a 6600 and have had no problems.

Welcome to the forums...
Reply With Quote
  #9  
Old 05-02-2007, 11:19 PM
harshad.sharma harshad.sharma is offline
Junior Member
 
Join Date: Apr 2007
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via Yahoo to harshad.sharma
Default Re: Problems with nvidia drivers
Originally Posted by unrealnet
First of all I am completely new to the *BSD systems. I have experience with Linux but it seems that BSD is quite different for me.


So now on the problem.
This morning i installed PC-BSD 1.2.
I have Nforce4 motherboard with GeForce 6100 video card integrated on the board. In Linux it work flawlessly but here in PCBSD there is some strange problem which i found that is not only on my system when i did a search through the forums.

This is what is the problem.

----- /var/log/messages -----
Quote:
Aug 31 16:50:11 PCBSD kernel: nvidia0: <GeForce 6100> mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 11 at device 5.0 on pci0
Aug 31 16:50:11 PCBSD kernel: nvidia0: [GIANT-LOCKED]

------ some lines cut ------

Aug 31 16:51:28 PCBSD kdm-bin[880]: X server for display :0 terminated unexpectedly
Aug 31 16:51:29 PCBSD kernel: NVRM: RmInitAdapter failed! (0x31:0xffffffff:958)
Aug 31 16:51:29 PCBSD kernel: nvidia0: NVRM: rm_init_adapter() failed!

Aug 31 16:51:29 PCBSD kdm-bin: :0[1080]: IO Error in XOpenDisplay
Aug 31 16:51:29 PCBSD kdm-bin[880]: X server for display :0 terminated unexpectedly
Aug 31 16:51:29 PCBSD kdm-bin[880]: Unable to fire up local display :0; disabling.

I had the same exact problem as you. After a lot of head-banging and hair-pulling, I realized that the VESA driver loaded in kernel might be causing problems.

#options VESA # Vesa Support for Splash

So I disabled it in the kernel configuration file and recompiled kernel.

'm happy to tell you - the drivers are working since!!
Reply With Quote
  #10  
Old 10-16-2007, 12:04 AM
copterguymike copterguymike is offline
Junior Member
 
Join Date: Oct 2007
Location: Clarksville TN. U.S.
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via AIM to copterguymike
Default Re: Problems with nvidia drivers

Greetings, I have been working this issue for a couple of days. And am happy to say that disabling VESA in /boot/loader.conf was the trick.
[code][vesa_load="NO"]
I hope this helps others as I was getting nowhere! it seems I was the only one with this particular issue up to finding this thread.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
nvidia drivers cshock General Support 1 03-23-2009 07:12 PM
Drivers de Nvidia fallout Soporte 1 09-11-2008 02:28 PM
Nvidia drivers? Mardoct General Questions 4 08-30-2008 10:24 PM
new bsd nvidia drivers mam28 Installing PC-BSD 0 06-26-2005 12:00 AM
ATI and NVIDIA drivers Feature Requests 9 06-08-2005 02:57 PM


All times are GMT. The time now is 01:46 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Copyright 2005-2010, The PC-BSD Project. PC-BSD and the PC-BSD logo are registered trademarks of iXsystems.
All other content is freely available for sharing under the terms of the Creative Commons Attribution License.