Reply
 
Thread Tools Display Modes
  #1  
Old 01-21-2006, 06:23 AM
nb_double_d nb_double_d is offline
Junior Member
 
Join Date: Jan 2006
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Default Custom kernel config.
I was attempting to configure my kernel and I ran into problems.
I have my config below.

The problem occurred when I attempted to build the kernel.
This is what I got:
+++++++++++++++++++++++++++++++++++++++++++++
PCBSD# make buildkernel KERNCONF=CUSTKERNEL

--------------------------------------------------------------
>>> Kernel build for CUSTKERNEL started on Sat Jan 21 01:48:51 PST 2006
--------------------------------------------------------------
===> CUSTKERNEL
mkdir -p /usr/obj/usr/src/sys

--------------------------------------------------------------
>>> stage 1: configuring the kernel
--------------------------------------------------------------
cd /usr/src/sys/i386/conf; PATH=/usr/obj/usr/src/i386/legacy/usr/sbin:/usr/obj/usr/src/i386/legacy/usr/bin:/usr/obj/usr/src/i386/legacy/usr/games:/usr/obj/usr/src/i386/usr/sbin:/usr/obj/usr/src/i386/usr/bin:/usr/obj/usr/src/i386/usr/games:/sbin:/bin:/usr/sbin:/usr/bin config -d /usr/obj/usr/src/sys/CUSTKERNEL /usr/src/sys/i386/conf/CUSTKERNEL
../../conf/files: coda/coda_fbsd.c must be optional, mandatory or standard
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.
PCBSD# /usr/sbin/config MYKERNEL
config: MYKERNEL: No such file or directory
PCBSD# /usr/sbin/config CUSTKERNEL
config: CUSTKERNEL: No such file or directory
PCBSD# cd ../compile/CUSTKERNEL
../compile/CUSTKERNEL: No such file or directory.
PCBSD# /usr/sbing/config MYKERNEL
/usr/sbing/config: Command not found.
PCBSD# /usr/sbin/config CUSTKERNEL
config: CUSTKERNEL: No such file or directory
PCBSD# cd /usr/src
PCBSD# make buildkernel KERNCONF=CUSTKERNEL

--------------------------------------------------------------
>>> Kernel build for CUSTKERNEL started on Sat Jan 21 01:52:11 PST 2006
--------------------------------------------------------------
===> CUSTKERNEL
mkdir -p /usr/obj/usr/src/sys

--------------------------------------------------------------
>>> stage 1: configuring the kernel
--------------------------------------------------------------
cd /usr/src/sys/i386/conf; PATH=/usr/obj/usr/src/i386/legacy/usr/sbin:/usr/obj/usr/src/i386/legacy/usr/bin:/usr/obj/usr/src/i386/legacy/usr/games:/usr/obj/usr/src/i386/usr/sbin:/usr/obj/usr/src/i386/usr/bin:/usr/obj/usr/src/i386/usr/games:/sbin:/bin:/usr/sbin:/usr/bin config -d /usr/obj/usr/src/sys/CUSTKERNEL /usr/src/sys/i386/conf/CUSTKERNEL
../../conf/files: coda/coda_fbsd.c must be optional, mandatory or standard
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.
++++++++++++++++++++++++++++++++++++++++++++++





Here is my custom config file:
+++++++++++++++++++++++++++++++++++++++++++

machine i386
#cpu I486_CPU
cpu I586_CPU
cpu I686_CPU
ident GENERIC

# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.

#options SCHED_4BSD # 4BSD scheduler
options SCHED_ULE # ULE scheduler
options INET # InterNETworking
#options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
#options NFSCLIENT # Network Filesystem Client
#options NFSSERVER # Network Filesystem Server
#options NFS_ROOT # NFS usable as /, requires NFSCLIENT
#options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options ADAPTIVE_GIANT # Giant mutex is adaptive.

device apic # I/O APIC

#FIREWALL OPTIONS - DO NOT REMOVE
#To enable IPFW with default deny all packets
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT=10

#To hide firewall from traceroute
options IPSTEALTH

#To hide from nmap, remove if create web server
options TCP_DROP_SYNFIN

#MULTIMEDIA IMPROVMENTS IN PERFORMANCE
options CPU_ENABLE_SSE #Enables SSE


# Bus support. Do not remove isa, even if you have no isa slots
device isa
device eisa
device pci

# Floppy drives
#device fdc

# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
#device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering

# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
#device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device trm # Tekram DC395U/UW/F DC315U adapters

#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aha # Adaptec 154x SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters

#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50

# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
#device ch # SCSI media changers
#device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
#device ses # SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
#device amr # AMI MegaRAID
#device arcmsr # Areca SATA II RAID
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device ciss # Compaq Smart RAID 5*
#device dpt # DPT Smartcache III, IV - See NOTES for options
#device hptmv # Highpoint RocketRAID 182x
#device iir # Intel Integrated RAID
#device ips # IBM (Adaptec) ServeRAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device twa # 3ware 9000 series PATA/SATA RAID

# RAID controllers
#device aac # Adaptec FSA RAID
#device aacp # SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device mlx # Mylex DAC960 family
#device pst # Promise Supertrak SX6000
#device twe # 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse

device vga # VGA video card driver

device splash # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device sc

# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor

device agp # support several AGP chipsets

# Floating point support - do not disable.
device npx

# Power management support (see NOTES for more options)
device apm
# Add suspend/resume support for the i8254.
device pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus

# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports

# Parallel port
#device ppc
#device ppbus # Parallel port bus (required)
#device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc

# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 adapter Gigabit Ethernet Card
#device ixgb # Intel PRO/10GbE Ethernet Card
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device bfe # Broadcom BCM440x 10/100 Ethernet
#device bge # Broadcom BCM570xx Gigabit Ethernet
#device dc # DEC/Intel 21143 and various workalikes
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device lge # Level 1 LXT1001 gigabit ethernet
#device nge # NatSemi DP83820 gigabit ethernet
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
#device re # RealTek 8139C+/8169/8169S/8110S
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device ti # Alteon Networks Tigon I/II gigabit Ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vge # VIA VT612x gigabit ethernet
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs. pccard NICs included.
device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device ex # Intel EtherExpress Pro/10 and Pro/10+
#device ep # Etherlink III based cards
#device fe # Fujitsu MB8696x based cards
#device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device lnc # NE2100, NE32-VL Lance Ethernet cards
#device sn # SMC's 9000 series of Ethernet chips
#device xe # Xircom pccard Ethernet

# ISA devices that use the old ISA shims
#device le

# Wireless NIC cards
device wlan # 802.11 support
#device an # Aironet 4500/4800 802.11 wireless NICs.
#device awi # BayStack 660 and others
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.

# Pseudo devices.
device loop # Network loopback
device mem # Memory and kernel memory devices
device io # I/O device
device random # Entropy device
device ether # Ethernet support
#device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
#device gif # IPv6 and IPv4 tunneling
#device faith # IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
#device bpf # Berkeley packet filter

# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
#device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
#device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
#device urio # Diamond Rio 500 MP3 player
#device uscanner # Scanners
# USB Ethernet, requires mii
#device aue # ADMtek USB Ethernet
#device axe # ASIX Electronics USB Ethernet
#device cdce # Generic USB over Ethernet
#device cue # CATC USB Ethernet
#device kue # Kawasaki LSI USB Ethernet
#device rue # RealTek RTL8150 USB Ethernet

# FireWire support
#device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
#device fwe # Ethernet over FireWire (non-standard!)
Reply With Quote
  #2  
Old 01-21-2006, 06:54 AM
nb_double_d nb_double_d is offline
Junior Member
 
Join Date: Jan 2006
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Hm. I'm not sure what is wrong. I'm rather new at this. But I tried the same thing but with the generic kernel. Same erro. I got an error code 1. It mentions something about a "coda".

Any help would be appreciated.
Reply With Quote
  #3  
Old 01-21-2006, 11:55 AM
AlphaX AlphaX is offline
Member
 
Join Date: Nov 2005
Posts: 39
Thanks: 0
Thanked 0 Times in 0 Posts
Default
I could be wrong but do you have the all of the source files installed? If not you would just need to run cvsup to download all of the source files first;

#cvsup /root/stantard-supfile

the procedure you are using to build the kernel will give errors if you dont have the full source installed.
Reply With Quote
  #4  
Old 01-21-2006, 12:15 PM
r21vo r21vo is offline
Junior Member
 
Join Date: Jan 2006
Location: Latvia
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
Default
well, how is your kernel configfile named and where it is located ?

it should be located at /usr/src/sys/i386/conf/
so, cd to that dir and run "config your_kernel_config_filename_here"

if that one runs succesfully cd to ../compile and run "make depend"
then run "make" and then "make install" to install kernel.
Reply With Quote
  #5  
Old 01-21-2006, 04:39 PM
nb_double_d nb_double_d is offline
Junior Member
 
Join Date: Jan 2006
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Well, I tried that, but I get this same error.

../../conf/files: coda/coda_fbsd.c must be optional, mandatory or standard

What is that asking?
Reply With Quote
  #6  
Old 01-21-2006, 04:40 PM
nb_double_d nb_double_d is offline
Junior Member
 
Join Date: Jan 2006
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Default
I should have been more specific. That appeared when trying to config my kernel.
Reply With Quote
  #7  
Old 01-21-2006, 05:22 PM
r21vo r21vo is offline
Junior Member
 
Join Date: Jan 2006
Location: Latvia
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
Default
have you tried to compile generic configuration file? if it compiles, then try to locate problem partly modifying your kernel config file.
Reply With Quote
  #8  
Old 01-21-2006, 06:02 PM
nb_double_d nb_double_d is offline
Junior Member
 
Join Date: Jan 2006
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Default
I've tried that. But it results in the same error. Trying to make the GENERIC config results in the exact same thing.
Reply With Quote
  #9  
Old 01-21-2006, 06:16 PM
nb_double_d nb_double_d is offline
Junior Member
 
Join Date: Jan 2006
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Well, someone else online seemed to have the same problem. (I finally found something relevant on a Google search.)

The reply was: It means that the userland is out of sync with the kernel version. Try updating the whole system through /stand/sysinstall, the cvs your sources and compile your kernel again.

What does this mean, and how should I do it.
Reply With Quote
  #10  
Old 01-21-2006, 06:46 PM
markiv34 markiv34 is offline
Member
 
Join Date: Jun 2005
Location: India
Posts: 41
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via MSN to markiv34 Send a message via Yahoo to markiv34
Default
Originally Posted by nb_double_d
Well, someone else online seemed to have the same problem. (I finally found something relevant on a Google search.)

The reply was: It means that the userland is out of sync with the kernel version. Try updating the whole system through /stand/sysinstall, the cvs your sources and compile your kernel again.

What does this mean, and how should I do it.
I am using FreeBSD 6.0 and installed the source from the cd, I had the same problem as your's as there were some source files missing /usr/src. Installing the source from cd using sysinstall should solve the problem. I can send you my kernel configuration file, but that would be earliest on Monday.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Custom Kernel? [SOLVED] cklester FreeBSD Help 5 02-23-2008 03:38 AM
Compiling a custom Kernel? Is this possible with PCBSD? DanFromWinterpeg Usage Bug Reports (read-only) 8 10-15-2007 10:29 PM
Custom Kernel BlueScreenTT FreeBSD Help 5 07-14-2006 12:38 AM
installed Kernel / Custom Kernel BlueScreenTT FreeBSD Help 6 07-04-2006 02:07 PM
custom kernel KJ General Questions 2 01-19-2006 07:42 AM


All times are GMT. The time now is 07:31 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Copyright 2005-2010, The PC-BSD Project. PC-BSD and the PC-BSD logo are registered trademarks of iXsystems.
All other content is freely available for sharing under the terms of the Creative Commons Attribution License.