How to install ueagle driver? - PC-BSD Forums

#1 11-05-2005, 08:48 PM

Please, i have a modem ADSL USB Huawei.
How to install driver eagle?.
Somebody has been able to install it correctly?.
As they are the steps?.

Help.....

#2 11-07-2005, 12:10 AM

Finally i can installed correctly driver ueagle.
I've got a good configuration of my conection but i when look the log of ppp show me these and i can´t established my conection to internet.
VPI: 0
VCI: 33
resolv.conf contains my DNS 1º and 2º
Follow this setps:
http://damien.bergamini.free.fr/ueagle/tutorials.html
http://damien.bergamini.free.fr/ueagle/ppp.html

Code:

PCBSD# cat /var/log/ppp.log
Nov 6 21:38:41 PCBSD ppp[1081] Phase: Using Interface: tune0
Nov 6 21:38:41 PCBSD ppp[1081] deflink: Created in closed state
Nov 6 21:38:41 PCBSD ppp[1081] PPP started (dedicated mode)
Nov 6 21:38:41 PCBSD ppp[1081] bundle: Established
Nov 6 21:38:41 PCBSD ppp[1081] deflink: closed -> opening
Nov 6 21:38:41 PCBSD ppp[1081] Conecting to ueagle0:0.33
Nov 6 21:38:41 PCBSD ppp[1081] Connected!
Nov 6 21:38:41 PCBSD ppp[1081] deflink: opening -> carrier
Nov 6 21:38:41 PCBSD ppp[1081] deflink: carrier -> lcp
Nov 6 21:38:41 PCBSD ppp[1081] deflink: Disconnected!

HELP!.Please.
as I solve it? I want to sail.

#3 11-10-2005, 05:13 PM

Still with errors.....
I can't connect to internet. PLEASE HELP ME.

Code:

PC-BSD# netstat -nr Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire 0 link#1 UC 0 0 vr0 => default 200.xx.xx.xx UGS 0 681 ppp0 10 link#3 U 0 0 ueagle 127.0.0.1 127.0.0.1 UH 0 10 lo0 200.xx.xx.x 200.xxx.xx.xx UH 1 0 ppp0 Internet6: Destination Gateway Flags Netif Expire ::1 ::1 UH lo0 fe80::%vr0/64 link#1 UC vr0 fe80::20c:76ff:fe59:ad6b%vr0 00:0c:76:59:ad:6b UHL lo0 fe80::%ueagle0/64 fe80::20c:76ff:fe59:ad6b%ueagle0 U ueagle0 fe80::20c:76ff:fe59:ad6b%ueagle0 link#3 UHL lo0 fe80::%lo0/64 fe80::1%lo0 U lo0 fe80::1%lo0 link#4 UHL lo0 ff01::/32 ::1 U lo0 ff02::%vr0/32 link#1 UC vr0 ff02::%ueagle0/32 fe80::20c:76ff:fe59:ad6b%ueagle0 UC ueagle0 ff02::%lo0/32 ::1 UC lo0

Code:

PCBSD# ifconfig vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::20c:76ff:fe59:ad6b%vr0 prefixlen 64 scopeid 0x1 inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 ether 00:0c:76:59:ad:6b media: Ethernet autoselect (none) status: no carrier plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 ueagle0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 10.0.0.1 netmask 0xff000000 broadcast 10.255.255.255 inet6 fe80::20c:76ff:fe59:ad6b%ueagle0 prefixlen 64 scopeid 0x3 tun0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1524 inet 200.xx.xx.xx --> 200.xx.xx.x netmask 0xffffff00

Code:

PCBSD# usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00 port 1 addr 2: full speed, self powered, config 1, deskjet 3500(0x7304), hp(0x03f0), rev 1.00 port 2 addr 3: full speed, power 400 mA, config 1, ADSL-USB Modem(0x9021), vendor 0x1110

#4 11-11-2005, 05:21 PM

I still can´t connect. :cry:

Code:

PC-BSD# netstat -nr
Routing tables

Internet:
Destination        Gateway            Flags    Refs      Use  Netif Expire
0                  link#1             UC          0        0    vr0 =>
default            200.xx.xx.xx       UGS         0      681   ppp0
10                 link#3             U           0        0 ueagle
127.0.0.1          127.0.0.1          UH          0       10    lo0
200.xx.xx.x       200.xxx.xx.xx       UH          1        0   ppp0

Internet6:
Destination                       Gateway                       Flags      Netif Expire
::1                               ::1                           UH          lo0
fe80::%vr0/64                     link#1                        UC          vr0
fe80::20c:76ff:fe59:ad6b%vr0      00:0c:76:59:ad:6b             UHL         lo0
fe80::%ueagle0/64                 fe80::20c:76ff:fe59:ad6b%ueagle0 U       ueagle0
fe80::20c:76ff:fe59:ad6b%ueagle0  link#3                        UHL         lo0
fe80::%lo0/64                     fe80::1%lo0                   U           lo0
fe80::1%lo0                       link#4                        UHL         lo0
ff01::/32                         ::1                           U           lo0
ff02::%vr0/32                     link#1                        UC          vr0
ff02::%ueagle0/32                 fe80::20c:76ff:fe59:ad6b%ueagle0 UC      ueagle0
ff02::%lo0/32                     ::1                           UC          lo0

Code:

PCBSD# ifconfig
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::20c:76ff:fe59:ad6b%vr0 prefixlen 64 scopeid 0x1
        inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
        ether 00:0c:76:59:ad:6b
        media: Ethernet autoselect (none)
        status: no carrier
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
ueagle0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 10.0.0.1 netmask 0xff000000 broadcast 10.255.255.255
        inet6 fe80::20c:76ff:fe59:ad6b%ueagle0 prefixlen 64 scopeid 0x3
tun0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1524
        inet 200.xx.xx.xx --> 200.xx.xx.x netmask 0xffffff00

Code:

PCBSD# kldstat -v
28    1 0xc0933000 74eb8    ueagle.ko
        Contains modules:
                Id Name
                40 uhub/ueagle

Code:

PCBSD#  adsl-up
hw.usb.ueagle.debug: 1 -> 1
eagleflash: Sorry, no pre-firmware modem found!
(The unplug & re-plug my modem)
PCBSD# adsl-up
hw.usb.ueagle.debug: 1 -> 1
Pre-firmware modem found at /dev/ugen0!
DSL Delineation    : GOOD
DSL DownRate       : 2464Kb/s
DSL UpRate         : 256Kb/s
El-NoXa# ppp -dedicated adsl
Working in dedicated mode
Using interface: tun0
Command: adsl: set device PPPoA:ueagle0:0.33
Command: adsl: set authname jack@mylogin
Command: adsl: set authkey ************
Command: adsl: enable lqr
Command: adsl: enable dns
Command: adsl: disable ipv6cp
Command: adsl: set reconnect 10 100

My ppp.conf

Code:

default:
 set log All Phase Chat LCP IPCP CCP tun command
 ident user-ppp VERSION (built COMPILATIONDATE)

# set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
# add default HISADDR                   # Add a (sticky) default route
default:
 set log Phase Warning
 add! default HISADDR
 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
 set login

adsl:
 set log local CCP Command DNS IPCP LCP TCP/IP Warning
 set device PPPoA:ueagle0:0.33
 set authname jack@mylogin
 set authkey ******************

 enable lqr
 enable dns
 disable ipv6cp

 set reconnect 10 100

Code:

Nov 11 11:04:09 El-NoXa kernel: ueagle0: at uhub0 port 2 (addr 3) disconnected
Nov 11 11:04:09 El-NoXa kernel: ueagle0: detached
Nov 11 11:04:11 El-NoXa kernel: ugen0: vendor 0x1110 product 0x9022, rev 1.10/50.00, addr 3
Nov 11 11:07:40 El-NoXa kernel: ugen0: at uhub0 port 2 (addr 3) disconnected
Nov 11 11:07:40 El-NoXa kernel: ugen0: detached
Nov 11 11:07:44 El-NoXa kernel: ueagle0: vendor 0x1110 ADSL-USB Modem, rev 1.00/50.0b, addr 3
Nov 11 11:07:44 El-NoXa kernel: ueagle0: End System Identifier: 00:73:04:47:b6:53
Nov 11 11:07:51 El-NoXa kernel: ueagle0: sending 14 blocks for fw page 0
Nov 11 11:07:51 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 10
Nov 11 11:07:52 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 20
Nov 11 11:07:52 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 1
Nov 11 11:07:52 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 12
Nov 11 11:07:55 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 1
Nov 11 11:07:55 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 18
Nov 11 11:07:56 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 13
Nov 11 11:07:57 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 2
Nov 11 11:07:57 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 15
Nov 11 11:07:57 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 15
Nov 11 11:07:57 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 17
Nov 11 11:08:00 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 8
Nov 11 11:08:01 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 3
Nov 11 11:08:02 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 16
Nov 11 11:08:02 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 11
Nov 11 11:08:02 El-NoXa kernel: ueagle0: sending 1 blocks for fw page 40
Nov 11 11:08:12 El-NoXa kernel: atmresolve: BCAST/MCAST packet detected/dumpedatmresolve: BCAST/MCAST packet detected/dumped
Nov 11 11:08:12 El-NoXa kernel: atmresolve: BCAST/MCAST packet detected/dumped
Nov 11 11:08:19 El-NoXa last message repeated 2 times
Nov 11 11:12:35 El-NoXa kernel: ueagle0: opening ATM virtual circuit

Code:

El-NoXa# cat /var/log/ppp.log
Nov 11 11:12:35 El-NoXa ppp[1337]: Phase: Using interface: tun0
Nov 11 11:12:35 El-NoXa ppp[1337]: Phase: deflink: Created in closed state
Nov 11 11:12:35 El-NoXa ppp[1338]: Phase: PPP Started (dedicated mode).
Nov 11 11:12:35 El-NoXa ppp[1338]: Phase: bundle: Establish
Nov 11 11:12:35 El-NoXa ppp[1338]: Phase: deflink: closed -> opening
Nov 11 11:12:35 El-NoXa ppp[1338]: Phase: deflink: Connecting to ueagle0:0.33
Nov 11 11:12:35 El-NoXa ppp[1338]: Phase: deflink: Connected!
Nov 11 11:12:35 El-NoXa ppp[1338]: Phase: deflink: opening -> carrier
Nov 11 11:12:35 El-NoXa ppp[1338]: Phase: deflink: carrier -> lcp
Nov 11 11:12:52 El-NoXa ppp[1338]: Phase: deflink: Disconnected!
Nov 11 11:13:24 El-NoXa last message repeated 2 times
Nov 11 11:13:56 El-NoXa last message repeated 2 times
Nov 11 11:14:08 El-NoXa ppp[1338]: Phase: Signal 15, terminate.

Code:

El-NoXa# cat /var/log/messages
Nov 11 11:03:04 El-NoXa syslogd: kernel boot file is /boot/kernel/kernel
Nov 11 11:03:04 El-NoXa kernel: Copyright (c) 1992-2005 The FreeBSD Project.
Nov 11 11:03:04 El-NoXa kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Nov 11 11:03:04 El-NoXa kernel: The Regents of the University of California. All rights reserved.
Nov 11 11:03:04 El-NoXa kernel: FreeBSD 5.4-RELEASE-p8 #0: Fri Nov 11 10:21:41 UTC 2005
Nov 11 11:03:04 El-NoXa kernel: jack@El-NoXa:/usr/src/sys/i386/compile/MYKERNEL
Nov 11 11:03:04 El-NoXa kernel: WARNING: debug.mpsafenet forced to 0 as netnatm requires Giant
Nov 11 11:03:04 El-NoXa kernel: WARNING: MPSAFE network stack disabled, expect reduced performance.
Nov 11 11:03:04 El-NoXa kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Nov 11 11:03:04 El-NoXa kernel: CPU: AMD Athlon(tm) XP 2600+ (1915.06-MHz 686-class CPU)
Nov 11 11:03:04 El-NoXa kernel: Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
Nov 11 11:03:04 El-NoXa kernel: Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
Nov 11 11:03:04 El-NoXa kernel: AMD Features=0xc0400000<AMIE,DSP,3DNow!>
Nov 11 11:03:04 El-NoXa kernel: real memory  = 536805376 (511 MB)
Nov 11 11:03:04 El-NoXa kernel: avail memory = 515624960 (491 MB)
Nov 11 11:03:04 El-NoXa kernel: ACPI APIC Table: <KM400  AWRDACPI>
Nov 11 11:03:04 El-NoXa kernel: ioapic0 <Version 0.3> irqs 0-23 on motherboard
Nov 11 11:03:04 El-NoXa kernel: splash_bmp: No appropriate video mode found
Nov 11 11:03:04 El-NoXa kernel: module_register_init: MOD_LOAD (splash_bmp, 0xc07e6810, 0) error 19
Nov 11 11:03:04 El-NoXa kernel: npx0: <math processor> on motherboard
Nov 11 11:03:04 El-NoXa kernel: npx0: INT 16 interface
Nov 11 11:03:04 El-NoXa kernel: acpi0: <KM400 AWRDACPI> on motherboard
Nov 11 11:03:04 El-NoXa kernel: acpi0: Power Button (fixed)
Nov 11 11:03:04 El-NoXa kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
Nov 11 11:03:04 El-NoXa kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
Nov 11 11:03:04 El-NoXa kernel: cpu0: <ACPI CPU> port 0x530-0x537 on acpi0
Nov 11 11:03:04 El-NoXa kernel: acpi_button0: <Power Button> on acpi0
Nov 11 11:03:04 El-NoXa kernel: acpi_button1: <Sleep Button> on acpi0
Nov 11 11:03:04 El-NoXa kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Nov 11 11:03:04 El-NoXa kernel: pci0: <ACPI PCI bus> on pcib0
Nov 11 11:03:04 El-NoXa kernel: agp0: <VIA 8235/8237 (Apollo KM400/KM400A) host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
Nov 11 11:03:04 El-NoXa kernel: pcib1: <PCI-PCI bridge> at device 1.0 on pci0
Nov 11 11:03:04 El-NoXa kernel: pci1: <PCI bus> on pcib1
Nov 11 11:03:04 El-NoXa kernel: pci1: <display, VGA> at device 0.0 (no driver attached)
Nov 11 11:03:04 El-NoXa kernel: pci1: <display> at device 0.1 (no driver attached)
Nov 11 11:03:04 El-NoXa kernel: uhci0: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 21 at device 16.0 on pci0
Nov 11 11:03:04 El-NoXa kernel: usb0: <VIA 83C572 USB controller> on uhci0
Nov 11 11:03:04 El-NoXa kernel: usb0: USB revision 1.0
Nov 11 11:03:04 El-NoXa kernel: uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Nov 11 11:03:04 El-NoXa kernel: uhub0: 2 ports with 2 removable, self powered
Nov 11 11:03:04 El-NoXa kernel: uhci1: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.1 on pci0
Nov 11 11:03:04 El-NoXa kernel: usb1: <VIA 83C572 USB controller> on uhci1
Nov 11 11:03:04 El-NoXa kernel: usb1: USB revision 1.0
Nov 11 11:03:04 El-NoXa kernel: uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Nov 11 11:03:04 El-NoXa kernel: uhub1: 2 ports with 2 removable, self powered
Nov 11 11:03:04 El-NoXa kernel: uhci2: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device 16.2 on pci0
Nov 11 11:03:04 El-NoXa kernel: usb2: <VIA 83C572 USB controller> on uhci2
Nov 11 11:03:04 El-NoXa kernel: usb2: USB revision 1.0
Nov 11 11:03:04 El-NoXa kernel: uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Nov 11 11:03:04 El-NoXa kernel: uhub2: 2 ports with 2 removable, self powered
Nov 11 11:03:04 El-NoXa kernel: ehci0: <VIA VT6202 USB 2.0 controller> mem 0xea000000-0xea0000ff irq 21 at device 16.3 on pci0
Nov 11 11:03:04 El-NoXa kernel: usb3: EHCI version 1.0
Nov 11 11:03:04 El-NoXa kernel: usb3: companion controllers, 2 ports each: usb0 usb1 usb2
Nov 11 11:03:04 El-NoXa kernel: usb3: <VIA VT6202 USB 2.0 controller> on ehci0
Nov 11 11:03:04 El-NoXa kernel: usb3: USB revision 2.0
Nov 11 11:03:04 El-NoXa kernel: uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
Nov 11 11:03:04 El-NoXa kernel: uhub3: 6 ports with 6 removable, self powered
Nov 11 11:03:04 El-NoXa kernel: isab0: <PCI-ISA bridge> at device 17.0 on pci0
Nov 11 11:03:04 El-NoXa kernel: isa0: <ISA bus> on isab0
Nov 11 11:03:04 El-NoXa kernel: atapci0: <VIA 8235 UDMA133 controller> port 0xdc00-0xdc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
Nov 11 11:03:04 El-NoXa kernel: ata0: channel #0 on atapci0
Nov 11 11:03:04 El-NoXa kernel: ata1: channel #1 on atapci0
Nov 11 11:03:04 El-NoXa kernel: pcm0: <VIA VT8235> port 0xe000-0xe0ff irq 22 at device 17.5 on pci0
Nov 11 11:03:04 El-NoXa kernel: pcm0: <Avance Logic ALC655 AC97 Codec>
Nov 11 11:03:04 El-NoXa kernel: vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe400-0xe4ff mem 0xea001000-0xea0010ff irq 23 at device 18.0 on pci0
Nov 11 11:03:04 El-NoXa kernel: miibus0: <MII bus> on vr0
Nov 11 11:03:04 El-NoXa kernel: ukphy0: <Generic IEEE 802.3u media interface> on miibus0
Nov 11 11:03:04 El-NoXa kernel: ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Nov 11 11:03:04 El-NoXa kernel: vr0: Ethernet address: 00:0c:76:59:ad:6b
Nov 11 11:03:04 El-NoXa kernel: acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
Nov 11 11:03:04 El-NoXa kernel: fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
Nov 11 11:03:04 El-NoXa kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Nov 11 11:03:04 El-NoXa kernel: sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Nov 11 11:03:04 El-NoXa kernel: sio0: type 16550A
Nov 11 11:03:04 El-NoXa kernel: ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
Nov 11 11:03:04 El-NoXa kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Nov 11 11:03:04 El-NoXa kernel: ppc0: FIFO with 16/16/9 bytes threshold
Nov 11 11:03:04 El-NoXa kernel: ppbus0: <Parallel port bus> on ppc0
Nov 11 11:03:04 El-NoXa kernel: lpt0: <Printer> on ppbus0
Nov 11 11:03:04 El-NoXa kernel: lpt0: Interrupt-driven port
Nov 11 11:03:04 El-NoXa kernel: ppi0: <Parallel I/O> on ppbus0
Nov 11 11:03:04 El-NoXa kernel: plip0: <PLIP network interface> on ppbus0
Nov 11 11:03:04 El-NoXa kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
Nov 11 11:03:04 El-NoXa kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Nov 11 11:03:04 El-NoXa kernel: kbd0 at atkbd0
Nov 11 11:03:04 El-NoXa kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Nov 11 11:03:04 El-NoXa kernel: psm0: model IntelliMouse, device ID 3
Nov 11 11:03:04 El-NoXa kernel: pmtimer0 on isa0
Nov 11 11:03:04 El-NoXa kernel: orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0
Nov 11 11:03:04 El-NoXa kernel: sc0: <System console> at flags 0x100 on isa0
Nov 11 11:03:04 El-NoXa kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Nov 11 11:03:04 El-NoXa kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Nov 11 11:03:04 El-NoXa kernel: sio1: configured irq 3 not in bitmap of probed irqs 0
Nov 11 11:03:04 El-NoXa kernel: sio1: port may not be enabled
Nov 11 11:03:04 El-NoXa kernel: ulpt0: hp deskjet 3500, rev 2.00/1.00, addr 2, iclass 7/1
Nov 11 11:03:04 El-NoXa kernel: ulpt0: using bi-directional mode
Nov 11 11:03:04 El-NoXa kernel: ueagle0: vendor 0x1110 ADSL-USB Modem, rev 1.00/50.0b, addr 3
Nov 11 11:03:04 El-NoXa kernel: ueagle0: End System Identifier: 00:73:04:47:b6:53
Nov 11 11:03:04 El-NoXa kernel: Timecounter "TSC" frequency 1915059860 Hz quality 800
Nov 11 11:03:04 El-NoXa kernel: Timecounters tick every 10.000 msec
Nov 11 11:03:04 El-NoXa kernel: ad0: 76351MB <SAMSUNG SP0802N/TK100-24> [155127/16/63] at ata0-master UDMA100
Nov 11 11:03:04 El-NoXa kernel: ad1: 76319MB <WDC WD800BB-00JHC0/05.01C05> [155061/16/63] at ata0-slave UDMA100
Nov 11 11:03:04 El-NoXa kernel: acd0: DVDROM <SONY DVD-ROM DDU1615/FYS2> at ata1-master UDMA33
Nov 11 11:03:04 El-NoXa kernel: acd1: DVDR <PIONEER DVD-RW DVR-110D/1.08> at ata1-slave UDMA66
Nov 11 11:03:04 El-NoXa kernel: Mounting root from ufs:/dev/ad1s2a
Nov 11 11:04:01 El-NoXa su: jack to root on /dev/ttyp1
Nov 11 11:04:09 El-NoXa kernel: ueagle0: at uhub0 port 2 (addr 3) disconnected
Nov 11 11:04:09 El-NoXa kernel: ueagle0: detached
Nov 11 11:04:11 El-NoXa kernel: ugen0: vendor 0x1110 product 0x9022, rev 1.10/50.00, addr 3

Nov 11 11:04:09 El-NoXa kernel: ueagle0: at uhub0 port 2 (addr 3) disconnected
Nov 11 11:04:09 El-NoXa kernel: ueagle0: detached
Nov 11 11:04:11 El-NoXa kernel: ugen0: vendor 0x1110 product 0x9022, rev 1.10/50.00, addr 3
Nov 11 11:07:40 El-NoXa kernel: ugen0: at uhub0 port 2 (addr 3) disconnected
Nov 11 11:07:40 El-NoXa kernel: ugen0: detached
Nov 11 11:07:44 El-NoXa kernel: ueagle0: vendor 0x1110 ADSL-USB Modem, rev 1.00/50.0b, addr 3
Nov 11 11:07:44 El-NoXa kernel: ueagle0: End System Identifier: 00:73:04:47:b6:53
Nov 11 11:07:51 El-NoXa kernel: ueagle0: sending 14 blocks for fw page 0
Nov 11 11:07:51 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 10
Nov 11 11:07:52 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 20
Nov 11 11:07:52 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 1
Nov 11 11:07:52 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 12
Nov 11 11:07:55 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 1
Nov 11 11:07:55 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 18
Nov 11 11:07:56 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 13
Nov 11 11:07:57 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 2
Nov 11 11:07:57 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 15
Nov 11 11:07:57 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 15
Nov 11 11:07:57 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 17
Nov 11 11:08:00 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 8
Nov 11 11:08:01 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 3
Nov 11 11:08:02 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 16
Nov 11 11:08:02 El-NoXa kernel: ueagle0: sending 2 blocks for fw page 11
Nov 11 11:08:02 El-NoXa kernel: ueagle0: sending 1 blocks for fw page 40
Nov 11 11:08:12 El-NoXa kernel: atmresolve: BCAST/MCAST packet detected/dumpedatmresolve: BCAST/MCAST packet detected/dumped
Nov 11 11:08:12 El-NoXa kernel: atmresolve: BCAST/MCAST packet detected/dumped
Nov 11 11:08:19 El-NoXa last message repeated 2 times
Nov 11 11:12:35 El-NoXa kernel: ueagle0: opening ATM virtual circuit

This is my modem. HELP! Please, any idea?.

atphalix · #5 07-30-2007, 12:12 AM

hey, on the site they say that we need to recompile the kernelhttp://damien.bergamini.free.fr/ueagle/ to get it to work.does it goes for the latest pcbsd? please help because I'm strugling for the last two days to compile the kernel and get it working other wise I'll just go back linux or maybe I'll give a tray to openbsd since they included the driver in the kernel from version 3.8.