Reply
 
Thread Tools Display Modes
  #1  
Old 06-19-2010, 10:43 AM
dalpets dalpets is offline
Junior Member
 
Join Date: Jun 2010
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
Default HP plug-in install failed
I'm trying to install my HP P1006 Laserjet printer. It requires an HP plug-in (cups does not have a ppd driver for this printer).
Any help you can provide would be appreciated.

Using the HP device manager....."download & install the plugin from an authorized server (recommended)" I get the following result;

"The download of the digital signature file failed.
Without this file, it is not possible to authenticate and validate the plug-in prior to installation."

Incidentally, HPLIP sees the printer as hp:/usb/HP-Laserjet_P1006?_ serial=AC2LW1E

WHEN I RUN THE FOLLOWING I get errors (highlighted in red). I thought they would be included in the basic system files. Apparently not. How do I go about installing them. i presume they would make a difference to my plugin failure.

[dalpets@pcbsd-584]/home/dalpets(70)% hp-check -t

HP Linux Imaging and Printing System (ver. 3.10.5)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball
(.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc)
or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases
(both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
FreeBSD pcbsd-584 8.1-PRERELEASE FreeBSD 8.1-PRERELEASE #1: Tue Jun 1 15:18:40 PDT 2010 root@build8x32.pcbsd.org:/usr/obj/local_storage/pcbsd-build81-x32/fbsd-source/8.1/sys/PCBSD i386

Distribution:
unknown 0.0

Checking Python version...
OK, version 2.6.5 installed

Checking PyQt 4.x version...
OK, version 4.7.3 installed.

Checking for CUPS...
Status: scheduler is running
Version: 1.4.3
warning: /usr/local/etc/cups/cupsd.conf file not found or not accessible.

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.1


------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.


Checking for dependency: CUPS image - CUPS image development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: DBus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.


Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.


Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.


Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.


Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 3.10.5 currently installed in '/usr/local/share/hplip'.

Current contents of '/usr/local/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.10.5

[dirs]
home=/usr/local/share/hplip
run=/var/run
ppd=/usr/local/share/ppd/HP
ppdbase=/usr/local/share/ppd
doc=/usr/local/share/doc/hplip-3.10.5
icon=/usr/local/share/applications
cupsbackend=/usr/local/libexec/cups/backend
cupsfilter=/usr/local/libexec/cups/filter
drv=/usr/local/libexec/cups/driver

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=no
dbus-build=no
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=yes
foomatic-rip-hplip-install=yes
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.10.4.16
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=no
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0



Current contents of '~/.hplip/hplip.conf' file:
[installation]
version = 3.10.4.16
date_time = 06/19/2010 19:31:17



--------------------------
| DISCOVERED USB DEVICES |
--------------------------

Device URI Model
---------------------------------------- ----------------------
hp:/usb/HP_LaserJet_P1006?serial=AC2LW1E HP LaserJet P1006

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------


LaserJetP1006
-------------
Type: Unknown
Device URI: usb:/dev/ulpt0


----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/usr/local/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.


---------------
| USER GROUPS |
---------------

dalpets wheel operator


-----------
| SUMMARY |
-----------

error: 8 errors and/or warnings.

Done.

Last edited by dalpets; 06-19-2010 at 11:15 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:16 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Copyright 2005-2010, The PC-BSD Project. PC-BSD and the PC-BSD logo are registered trademarks of iXsystems.
All other content is freely available for sharing under the terms of the Creative Commons Attribution License.