realtek alc268 no sound - PC-BSD Forums

Kll · #1 03-10-2010, 07:55 PM

Hello all, PC-BSD is my first experience with other os than windows. Everything works great except sound

.

Code:

[pawel@pcbsd-3255 /usr/home/pawel]$ osstest
Sound subsystem and version: FreeBSD native OSS ABI 800107 (0x00040000)
Platform: FreeBSD/amd64 8.0-RELEASE-p2 FreeBSD 8.0-RELEASE-p2 #10: Thu Jan  7 14:50:53 EST 2010     root@build8x64.pcbsd.org:/usr/obj/usr/pcbsd-build80/fbsd-source/8.0-src/sys/PCBSD
/dev/dsp0.p0 (audio engine 0): pcm0:play:dsp0.p0
- Performing audio playback test... /dev/dsp0.p0: Device busy
Can't open the device
/dev/dsp0.vp0 (audio engine 1): pcm0:virtual:dsp0.vp0
- Performing audio playback test...
  <left> OK <right> OK <stereo> OK <measured srate 47995.00 Hz (-0.01%)>
/dev/dsp0.vp1 (audio engine 2): pcm0:virtual:dsp0.vp1
- Performing audio playback test...
  <left> OK <right> OK <stereo> OK <measured srate 47995.00 Hz (-0.01%)>
/dev/dsp0.vp2 (audio engine 3): pcm0:virtual:dsp0.vp2
- Performing audio playback test...
  <left> OK <right> OK <stereo> OK <measured srate 47995.00 Hz (-0.01%)>
/dev/dsp0.vp3 (audio engine 4): pcm0:virtual:dsp0.vp3
- Performing audio playback test...
  <left> OK <right> OK <stereo> OK <measured srate 47896.00 Hz (-0.22%)>
/dev/dsp0.r0 (audio engine 5): pcm0:record:dsp0.r0
- Skipping input only device
/dev/dsp0.vr0 (audio engine 6): pcm0:virtual:dsp0.vr0
- Skipping input only device
/dev/dsp0.vr1 (audio engine 7): pcm0:virtual:dsp0.vr1
- Skipping input only device
/dev/dsp0.vr2 (audio engine 8): pcm0:virtual:dsp0.vr2
- Skipping input only device
/dev/dsp0.vr3 (audio engine 9): pcm0:virtual:dsp0.vr3
- Skipping input only device

*** Some errors were detected during the tests ***
[pawel@pcbsd-3255 /usr/home/pawel]$

Kll · #2 03-12-2010, 08:54 AM

Ok googled it and problem solved no help needed. Now I try to get my wifi card to work(Broadcom 432 AGN) and build in webcam, my laptop is compal jfl92.

avi · #3 03-12-2010, 10:02 AM

Hello, would you please post how did you solve this, cause i have the same problem(same device "realtek alc268").

bjs · #4 03-12-2010, 11:03 AM

Could you please share how you solved you problem with us. At least post the link to the website that helped you.

You might want to consider starting a new thread in the Networking forum. Have you checked to see if the wifi chipset is even supported? Also, check the FreeBSD handbook and the forums there as there was a major rewrite of the wireless setup in v8.0.

Webcams are very hit and miss, however, I did run across something about them here, FreeBSD webcam support: video4bsd, that might be of interest. You could also google webcam and freebsd.

Good luck!!

Kll · #5 03-12-2010, 04:10 PM

well I typed

Code:

mixer

into terminal
and mixer ogain was 0 so I set it like this

Code:

Mixer vol      is currently set to 100:100
Mixer pcm      is currently set to 100:100
Mixer speaker  is currently set to 100:100
Mixer mic      is currently set to  79:79
Mixer rec      is currently set to  81:81
Mixer ogain    is currently set to  81:81
Mixer monitor  is currently set to  75:75
Recording source: mic

avi · #6 03-12-2010, 08:47 PM

thanks!! the sound is working now.

FitzLT · #7 03-18-2010, 07:13 PM

THANK YOU so very much!!! My "mixer ogain" was set to set to 0:0. I set it to 100:100 by typing "mixer ogain 100:100" in the terminal(for those who may not know). Sound works perfectly now!!! Finally!!!!!!!!!!!!!!!!!!

P.S. It's the little things people take for granted...