PC-BSD 7.1-RC1 Diagnostic Sheet
Generated: Fri Apr 3 10:22:43 EST 2009
-----------------Dmesg Output-------------------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-PRERELEASE #9: Fri Mar 20 18:29:01 EDT 2009
root@pcbsdx32-7:/usr/obj/pcbsd-build71/cvs/7.1-src/sys/PCBSD
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2994.40-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR>
Logical CPUs per core: 2
real memory = 1602109440 (1527 MB)
avail memory = 1556008960 (1483 MB)
ACPI APIC Table: <COMPAQ GRANTSD >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <COMPAQ CPQ0968> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 5ff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xcfd00000-0xcfd7ffff,0xe0000000-0xefffffff,0xcfd80000-0xcfdbffff irq 16 at device 2.0 on pci0
agp0: <Intel 82915G (915G GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci32: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci64: <ACPI PCI bus> on pcib2
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4001> mem 0xf0400000-0xf040ffff irq 17 at device 0.0 on pci64
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:13:21:ef:ef:7e
bge0: [ITHREAD]
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1440-0x145f irq 20 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1460-0x147f irq 18 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1480-0x149f irq 21 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x14a0-0x14bf irq 22 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xcfdc0000-0xcfdc03ff irq 20 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
rum0: <Belkin Belkin 54g USB Network Adapter, class 0/0, rev 2.00/0.01, addr 2> on uhub4
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528
rum0: WARNING: using obsoleted IFF_NEEDSGIANT flag
rum0: Ethernet address: 00:17:3f:c5:da:7d
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib3
pci5: <multimedia, video> at device 9.0 (no driver attached)
pci5: <multimedia> at device 9.1 (no driver attached)
pci0: <multimedia, audio> at device 30.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x14e0-0x14ef irq 17 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH6 SATA150 controller> port 0x1818-0x181f,0x1830-0x1833,0x1820-0x1827,0x1834-0x1837,0x14f0-0x14ff irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xcb7ff,0xcb800-0xcd7ff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forwarding disabled, default to accept, logging disabled
acd0: CDROM <HL-DT-ST GCR-8240N/1.05> at ata0-master PIO4
ad0: 38166MB <Seagate ST340014AS 3.43> at ata2-master SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s1a
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata0:0:0:0): CAM Status: SCSI Status Error
(probe0:ata0:0:0:0): SCSI Status: Check Condition
(probe0:ata0:0:0:0): NOT READY asc:3a,0
(probe0:ata0:0:0:0): Medium not present
(probe0:ata0:0:0:0): Unretryable error
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST CD-ROM GCR-8240N 1.05> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
pcm0: <Intel ICH6 (82801FB)> port 0x1000-0x10ff,0x1400-0x143f mem 0xcfdc0400-0xcfdc05ff,0xcfdc0600-0xcfdc06ff irq 21 at device 30.2 on pci0
pcm0: [ITHREAD]
pcm0: <Analog Devices AD1981B AC97 Codec>
drm0: <Intel i915G> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
drm0: [ITHREAD]
pid 1505 (nepomukservicestub), uid 1001: exited on signal 6
umass0: <Sony DRX-S70U, class 0/0, rev 2.00/2.40, addr 3> on uhub4
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
(probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
cd1 at umass-sim0 bus 0 target 0 lun 0
cd1: <Optiarc DVD RW AD-7540A 1.D3> Removable CD-ROM SCSI-0 device
cd1: 40.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
pid 1528 (nepomukservicestub), uid 1001: exited on signal 6
umass0: at uhub4 port 7 (addr 3) disconnected
(cd1:umass-sim0:0:0:0): lost device
(cd1:umass-sim0:0:0:0): removing device entry
umass0: detached
-----------------Messages Output----------------------
Apr 3 10:03:16 pcbsd kernel: (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
Apr 3 10:03:16 pcbsd kernel: (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
Apr 3 10:03:16 pcbsd kernel: (probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
Apr 3 10:03:16 pcbsd kernel: (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
Apr 3 10:03:16 pcbsd kernel: (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
Apr 3 10:03:16 pcbsd kernel: (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
Apr 3 10:03:16 pcbsd kernel: (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
Apr 3 10:03:16 pcbsd kernel: (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
Apr 3 10:03:16 pcbsd kernel: (probe0:umass-sim0:0:0:0): Medium not present
Apr 3 10:03:16 pcbsd kernel: (probe0:umass-sim0:0:0:0): Unretryable error
Apr 3 10:03:16 pcbsd kernel: cd1 at umass-sim0 bus 0 target 0 lun 0
Apr 3 10:03:16 pcbsd kernel: cd1: <Optiarc DVD RW AD-7540A 1.D3> Removable CD-ROM SCSI-0 device
Apr 3 10:03:16 pcbsd kernel: cd1: 40.000MB/s transfers
Apr 3 10:03:16 pcbsd kernel: cd1: Attempt to query device size failed: NOT READY, Medium not present
Apr 3 10:03:24 pcbsd kernel: pid 1528 (nepomukservicestub), uid 1001: exited on signal 6
Apr 3 10:05:37 pcbsd kernel: umass0: at uhub4 port 7 (addr 3) disconnected
Apr 3 10:05:37 pcbsd kernel: (cd1:umass-sim0:0:0:0): lost device
Apr 3 10:05:37 pcbsd kernel: (cd1:umass-sim0:0:0:0): removing device entry
Apr 3 10:05:37 pcbsd kernel: umass0: detached
Apr 3 10:22:07 pcbsd su: bhoemen to root on /dev/ttyp5
------------------RC File-----------------------------
background_dhclient="YES"
compat5x_enable="YES"
sshd_enable="YES"
usbd_enable="YES"
# Disable Moused by default. Xorg sets up the mouse automatically, and moused can conflict with it.
moused_type="auto"
moused_enable="YES"
devd_enable="YES"
devfs_system_ruleset="devfsrules_common"
sendmail_enable="NO"
sendmail_rebuild_aliases="YES"
ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/kde4/lib /usr/local/lib/compat/pkg"
# Enable the pcbsd startup / shutdown scripts
pcbsdinit_enable="YES"
#Enable samba server
samba_enable="YES"
# Disable LPD
lpd_enable="NO"
# Enable CUPS
cupsd_enable="YES"
linux_enable="YES"
# FSCK Enhancements
fsck_y_enable="YES"
background_fsck="NO"
# tmpmfs Flags
tmpmfs="YES"
tmpsize="800m"
tmpmfs_flags="-S"
clear_tmp="YES"
# Denyhosts Startup
denyhosts_enable="YES"
# powerd: adaptive speed while on AC power, adaptive while on battery power
powerd_enable="YES"
powerd_flags="-a adaptive -b adaptive" # set CPU frequency
# enable HALd
dbus_enable="YES"
polkitd_enable="YES"
hald_enable="YES"
# Enables support for HPLIP
hpiod_enable="NO"
hpssd_enable="NO"
# ntpdate is deprecated and will eventually be removed from the distribution since
# the same functionality is available in ntpd(8).
# Without "ntpd_sync_on_start" option, ntpd refuses to perform an
# initial correction if the clock offset is too large.
#
ntpd_enable="YES"
ntpd_sync_on_start="YES"
# Enable the firewall
pf_rules="/etc/pf.conf"
pf_enable="YES"
pf_flags=""
# Enable ipfw and open it by default since we have PF
firewall_enable="YES"
firewall_type="open"
snddetect_enable="YES"
mixer_enable="YES"
bsdstats_enable="YES"
hostname="pcbsd"
ifconfig_bge0="DHCP"
ifconfig_rum0="WPA DHCP"
------------------Loader File-------------------------
linux_load="YES"
ulpt_load="YES"
#vesa_load="YES"
#splash_pcx_load="YES"
#bitmap_load="YES"
#bitmap_name="/boot/loading-screen.pcx"
hw.ata.atapi_dma="1"
autoboot_delay="5"
kern.ipc.shmseg=1024
kern.ipc.shmmni=1024
legal.intel_iwi.license_ack=1
legal.intel_wpi.license_ack=1
wpi_load="YES"
kern.hz=100
splash_pcx_load="YES"
vesa_load="YES"
bitmap_load="YES"
bitmap_name="/boot/loading-screen.pcx"
beastie_disable="NO"
------------------Free Space--------------------------
Filesystem 1M-blocks Used Avail Capacity Mounted on
/dev/ad0s1a 36464 7564 25983 23% /
devfs 0 0 0 100% /dev
linprocfs 0 0 0 100% /compat/linux/proc
procfs 0 0 0 100% /proc
/dev/md0 771 18 691 3% /tmp
------------------System Processes--------------------
last pid: 23716; load averages: 0.66, 0.54, 0.56 up 0+00:31:53 10:22:43
179 processes: 1 running, 178 sleeping
Mem: 392M Active, 574M Inact, 200M Wired, 88K Cache, 112M Buf, 321M Free
Swap: 512M Total, 512M Free
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
1236 root 1 50 0 339M 325M select 0 2:49 8.98% Xorg
1454 bhoemen 1 49 0 76956K 37592K select 0 3:08 6.98% kded4
1489 bhoemen 1 47 0 55132K 24308K select 1 0:12 3.96% kwin
12107 bhoemen 1 47 0 59532K 36956K select 0 1:14 1.95% npviewer.bin
2443 root 1 44 0 64368K 27648K select 0 1:38 0.00% kded4
11451 bhoemen 6 44 0 102M 93884K ucond 0 0:14 0.00% firefox-bin
1711 bhoemen 1 96 0 62092K 26260K select 1 0:14 0.00% NetworkTray
1600 bhoemen 1 44 0 58696K 24572K select 1 0:14 0.00% kmix
12123 bhoemen 1 20 0 59532K 36956K pause 0 0:11 0.00% npviewer.bin
1518 bhoemen 1 44 0 49120K 31908K select 1 0:10 0.00% nepomukservicestub
2491 root 1 44 0 39000K 21904K select 1 0:09 0.00% kdeinit4
1055 root 1 44 0 3268K 1056K select 1 0:05 0.00% moused
1712 bhoemen 1 44 0 71028K 34828K select 1 0:04 0.00% SystemUpdaterTray
1237 haldaemon 1 44 0 6768K 4440K select 1 0:03 0.00% hald
23303 root 1 96 0 69116K 35532K select 0 0:03 0.00% kcmshell4
1027 root 1 44 0 3184K 1004K select 1 0:02 0.00% powerd
985 root 1 8 0 3464K 1416K wait 0 0:02 0.00% sh
20223 bhoemen 1 44 0 59532K 36956K pcmwrv 1 0:02 0.00% npviewer.bin |
CD's Don't Work
Linear Mode
