I'm a FreeBSD user and I'm investigating PC-BSD. Was happy until I found my sound card wasn't working and the hardware has been fine in FreeBSD (8.0-RELEASE-p6)
I finished a fresh install of PC-BSD
|
Code:
|
FreeBSD pcbsd-4974 8.1-RELEASE FreeBSD 8.1-RELEASE #1: Sat Jul 17 14:19:59 PDT 2010 root@build8x64.pcbsd.org:/usr/obj/usr/pcbsd-build81/fbsd-source/8.1/sys/PCBSD amd64 |
kldstat shows
|
Code:
|
Id Refs Address Size Name
16 4 0xffffffff81154000 751d0 sound.ko
17 1 0xffffffff811ca000 13eb0 snd_uaudio.ko
38 1 0xffffffff82226000 141c6 snd_hda.ko |
mixer shows
|
Code:
|
Mixer vol is currently set to 100:100
Mixer pcm is currently set to 100:100 |
osstest shows - bold section looks iffy!
|
Code:
|
Sound subsystem and version: FreeBSD native OSS ABI 801000 (0x00040000)
Platform: FreeBSD/amd64 8.1-RELEASE FreeBSD 8.1-RELEASE #1: Sat Jul 17 14:19:59 PDT 2010 root@build8x64.pcbsd.org:/usr/obj/usr/pcbsd-build81/fbsd-source/8.1/sys/PCBSD
/dev/dsp0.p0 (audio engine 0): pcm0:play:dsp0.p0
- Performing audio playback test... /dev/dsp0.p0: Device busy
Can't open the device
/dev/dsp0.vp0 (audio engine 1): pcm0:virtual:dsp0.vp0
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47995.00 Hz (-0.01%)>
/dev/dsp0.vp1 (audio engine 2): pcm0:virtual:dsp0.vp1
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47997.00 Hz (-0.01%)>
/dev/dsp0.vp2 (audio engine 3): pcm0:virtual:dsp0.vp2
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47995.00 Hz (-0.01%)>
/dev/dsp0.vp3 (audio engine 4): pcm0:virtual:dsp0.vp3
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47997.00 Hz (-0.01%)>
/dev/dsp0.r0 (audio engine 5): pcm0:record:dsp0.r0
- Skipping input only device
/dev/dsp0.vr0 (audio engine 6): pcm0:virtual:dsp0.vr0
- Skipping input only device
/dev/dsp0.vr1 (audio engine 7): pcm0:virtual:dsp0.vr1
- Skipping input only device
/dev/dsp0.vr2 (audio engine 8): pcm0:virtual:dsp0.vr2
- Skipping input only device
/dev/dsp0.vr3 (audio engine 9): pcm0:virtual:dsp0.vr3
- Skipping input only device
/dev/dsp1.p0 (audio engine 10): pcm1:play:dsp1.p0
- Performing audio playback test... /dev/dsp1.p0: Device busy
Can't open the device
/dev/dsp1.vp0 (audio engine 11): pcm1:virtual:dsp1.vp0
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47997.00 Hz (-0.01%)>
/dev/dsp1.r0 (audio engine 12): pcm1:record:dsp1.r0
- Skipping input only device
/dev/dsp1.vr0 (audio engine 13): pcm1:virtual:dsp1.vr0
- Skipping input only device
/dev/dsp2.p0 (audio engine 14): pcm2:play:dsp2.p0
- Performing audio playback test... /dev/dsp2.p0: Device busy
Can't open the device
/dev/dsp2.vp0 (audio engine 15): pcm2:virtual:dsp2.vp0
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47997.00 Hz (-0.01%)>
/dev/dsp3.p0 (audio engine 16): pcm3:play:dsp3.p0
- Performing audio playback test... /dev/dsp3.p0: Device busy
Can't open the device
/dev/dsp3.vp0 (audio engine 17): pcm3:virtual:dsp3.vp0
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47988.00 Hz (-0.03%)>
*** Some errors were detected during the tests *** |
dmesg shows
|
Code:
|
hdac0: <Intel 82801JI High Definition Audio Controller> mem 0xf9ff8000-0xf9ffbfff irq 22 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
hdac0: HDA Codec #0: Realtek ALC888
pcm0: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC888 PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA Realtek ALC888 PCM #2 Digital> at cad 0 nid 1 on hdac0
pcm3: <HDA Realtek ALC888 PCM #3 Digital> at cad 0 nid 1 on hdac0 |
cat /dev/sndstat shows
|
Code:
|
FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64)
Installed devices:
pcm0: <HDA Realtek ALC888 PCM #0 Analog> (play/rec)
pcm1: <HDA Realtek ALC888 PCM #1 Analog> (play/rec)
pcm2: <HDA Realtek ALC888 PCM #2 Digital> (play)
pcm3: <HDA Realtek ALC888 PCM #3 Digital> (play) default |
I have even toggled hw.snd.default_unit in /etc/sysctl.conf between digital and analog to no avail. Was analog in freebsd, I guess I grasping at straws.
I'm out of ideas!
I even double checked the speaker cable to the PC! The sound works fine when I boot by FreeBSD disk and simply specify snd_hda_load="YES" in loader.conf.
I wish to migrate to PC-BSD so any help would be awesome! Everything checks out I simply have no sound.
mplayer acts as if it'splaying the file also, just nothing!
|
Code:
|
mplayer 01\ Closing\ In.mp3
MPlayer SVN-r30341-snapshot-4.2.1 (C) 2000-2009 MPlayer Team
Playing 01 Closing In.mp3.
Audio only file format detected.
Clip info:
Title: Closing In
Artist: Seventh Void
Album: Heaven Is Gone
Year: 2009
Comment: .
Track: 1
Genre: Hard Rock
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 44100 Hz, 2 ch, s16le, 64.0 kbit/4.54% (ratio: 8000->176400)
Selected audio codec: [ffmp3] afm: ffmpeg (FFmpeg MPEG layer-3 audio)
==========================================================================
AO: [oss] 44100Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A: 4.7 (04.7) of 851.0 (14:11.0) 0.7%
MPlayer interrupted by signal 2 in module: play_audio
A: 4.7 (04.7) of 851.0 (14:11.0) 0.7%
Exiting... (Quit) |
Thanks,
Jon
No Sound - snd_hda.ko - HDA Realtek ALC888 PCM
Threaded Mode