[solved] PCBSD unable to mount usb flash device!

[csynt]

Hi,

I just installed the PCBSD...

I have problems to mount my flash drives.

[case 1]
I plug the Sandisk Cruzer Mini.. nothing happens...

console reports this :

kernel: umass0: SanDisk Corporation Cruzer Mini, rev 2.00/1.25, addr 2
kernel: info: [drm] Loading R200 Microcode
kernel: (da0:umass-sim0:0:0:0): got CAM status 0x4
kernel: (da0:umass-sim0:0:0:0): fatal error, failed to attach to device
kernel: (da0:umass-sim0:0:0:0): lost device
kernel: info: [drm] Loading R200 Microcode

[case 2]
I plug the Kingston (datatraveller elite) I got an error on KDE "mount: Insufficient permissions, unknown filesystem, or media not inserted"

again, this is the output of console:

kernel: (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
kernel: (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
kernel: (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
kernel: (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
kernel: (da0:umass-sim0:0:0:0): UNIT ATTENTION asc:3a,0
kernel: (da0:umass-sim0:0:0:0): Medium not present
kernel: (da0:umass-sim0:0:0:0): Retries Exhausted
kernel: Opened disk da0 -> 6
kernel: (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
kernel: (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
kernel: (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
kernel: (da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
kernel: (da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
kernel: (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
kernel: ext2fs: da0: wrong magic number 0 (expected 0xef53)
kernel: info: [drm] Loading R200 Microcode


Any help/ideas?

Regards

Chris