PDA

View Full Version : Casio ex-z50 USB digital Camera


koozdra
08-31-2005, 03:03 AM
Hi, I'm trying to connect my digital camera to PC-BSD 0.7.8. I've searched online for some advice but couldn't find any...
my dmesg output when I connect the camera is..

umass0: CASIO COMPUTER CASIO QV DIGITAL, rev 1.00/10.00, addr 2
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present sks:0x80,0xffff
(probe0:umass-sim0:0:0:0): Unretryable error

I'm not really sure what further steps I should take to diagnose the problem. This camera mounted as a portable drive on my windows machine without any problems.

Thanks for any help.

koozdra
09-01-2005, 07:39 PM
Oh well, I geuss there are just somethings only windows can provide.... hello dual boot.

popey
09-01-2005, 07:57 PM
gphoto2 is always worth a try if you can't mount a camera as a storage device, support for casio qv is listed as experimental so may work.

koozdra
09-04-2005, 06:51 PM
unfortunately casio qv is an old model from Casio... My camera isn't supported :cry:

jennylyn01
08-11-2011, 01:51 AM
Hi, I'm trying to connect my digital camera to PC-BSD 0.7.8. I've searched online for some advice but couldn't find any...
my dmesg output when I connect the camera is..

umass0: CASIO COMPUTER CASIO QV DIGITAL, rev 1.00/10.00, addr 2
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present sks:0x80,0xffff
(probe0:umass-sim0:0:0:0): Unretryable error

I'm not really sure what further steps I should take to diagnose the problem. This camera mounted as a portable drive on my windows machine without any problems.

Thanks for any help.


have you try reading the manual? if you don't, then see it first before connecting to a PC -BSD. Because it might be that the port of your digital camera is not supported by the PC.