PDA

View Full Version : Meesages during startup


Dr.
09-05-2007, 05:03 PM
Hi I receive many messages with this error;
interrupt storm detected on "irq15:"; throttling interrupt source

E4300 @3 Ghz + Gigabyte P35-DS3P + 2*1024 mb RAM + 8600GT + Seagate 320 gigas.
$ dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #67: Sat Aug 25 11:14:04 PDT 2007
root@pcbsd:/usr/obj/usr/src/sys/PCBSD-SMP
module_register: module uhub/ulpt already exists!
Module uhub/ulpt failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz (2997.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f2 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SS E,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,<b9>,CX16,<b14>,<b15>>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2146304000 (2046 MB)
avail memory = 2086776832 (1990 MB)
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 16 Entries> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 11 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce 8600 GT> port 0xa000-0xa07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf4000000-0xf5ffffff irq 11 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
uhci0: <UHCI (generic) USB controller> port 0xd100-0xd11f irq 11 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xd200-0xd21f irq 9 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xd000-0xd01f irq 3 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfa104000-0xfa1043ff irq 3 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <PCIBIOS PCI-PCI bridge> irq 11 at device 28.0 on pci0
pci2: <PCI bus> on pcib2
pcib3: <PCIBIOS PCI-PCI bridge> irq 11 at device 28.4 on pci0
pci3: <PCI bus> on pcib3
atapci0: <JMicron JMB363 SATA300 controller> port 0xb000-0xb007,0xb100-0xb103,0xb200-0xb207,0xb300-0xb303,0xb400-0xb40f mem 0xfa000000-0xfa001fff irq 11 at device 0.0 on pci3
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ata4: <ATA channel 2> on atapci0
pcib4: <PCIBIOS PCI-PCI bridge> irq 10 at device 28.5 on pci0
pci4: <PCI bus> on pcib4
re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xf9000000-0xf9000fff irq 10 at device 0.0 on pci4
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:1a:4d:47:74:a5
re0: [FAST]
uhci3: <UHCI (generic) USB controller> port 0xd300-0xd31f irq 5 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xd400-0xd41f irq 15 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xd500-0xd51f irq 3 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfa105000-0xfa1053ff irq 5 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
pcib5: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci5: <PCI bus> on pcib5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <GENERIC ATA controller> port 0xd600-0xd607,0xd700-0xd703,0xd800-0xd807,0xd900-0xd903,0xda00-0xda0f,0xdb00-0xdb0f irq 15 at device 31.2 on pci0
ata5: <ATA channel 0> on atapci1
ata6: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <GENERIC ATA controller> port 0xdd00-0xdd07,0xde00-0xde03,0xdf00-0xdf07,0xe000-0xe003,0xe100-0xe10f,0xe200-0xe20f irq 15 at device 31.5 on pci0
ata7: <ATA channel 0> on atapci2
ata8: <ATA channel 1> on atapci2
pmtimer0 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
ulpt0: hp deskjet 3500, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
Timecounter "TSC" frequency 2997014823 Hz quality 800
Timecounters tick every 1.000 msec
interrupt storm detected on "irq15:"; throttling interrupt source
ad0: 305244MB <Seagate ST3320620AS 3.AAE> at ata5-master PIO4
unknown: timeout waiting for read DRQ
unknown: timeout waiting for read DRQ
acd0: DVDR <SONY DVD RW AW-G170S/1.72> at ata6-master PIO4
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
cd0 at ata6 bus 0 target 0 lun 0
cd0: <SONY DVD RW AW-G170S 1.72> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s3a
WARNING: / was not properly dismounted
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
interrupt storm detected on "irq15:"; throttling interrupt source
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
pcm0: <Intel 82801I High Definition Audio Controller> mem 0xfa100000-0xfa103fff irq 14 at device 27.0 on pci0
pcm0: <HDA Codec: Realtek ALC885>
pcm0: <HDA Driver Revision: 20070710_0047>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
re0: link state changed to UP
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
re0: link state changed to DOWN
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
re0: link state changed to UP
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
interrupt storm detected on "irq15:"; throttling interrupt source
and continue & continue.....

Solarin
09-05-2007, 05:35 PM
The problem is related to the piece of hardware you have attached to irq15.

If you look in your BIOS, it might be able to tell you what that is. Apparently it's commonly used for the secondary IDE channel.

An interrupt storm is when a device sends a whole bunch of interrupts in a very short space or time. Can be a symptom of old/bad hardware.

Dr.
09-05-2007, 06:08 PM
Strangely configure S-ATA MODE in BIOS as AHCI (previously IDE) and the error (message) disappear. :D

Wow....now single I need to solve the problem of GRUB (http://forums.pcbsd.org/viewtopic.php?t=9490) nothing else. :?

Thanxs!