Stuck in 1024x768 [SOLVED]

[boudi]

Hello and salutations, I finally got a chance to sit back down with my laptop and work with PCBSD. The install was smooth and painless and I have much respect for everyone involved. I have stumbled across a problem with my video card or monitor. I seem to be stuck at 1024x768 or worse. I've tried the pimpmyvga.sh provide by antik in the "Cant get my Lap to run 1280x800 res" thread. Whenever I test xorg.conf.detected or xorg.conf.new, I get a couple of errors (forgot what they were but I'll post them in a sec). I welcome all advice/suggestions.
Thanks much
boudi
p.s. I just love the PBIs.

[boudi]

Here is a copy of my xorg.0.log:


X Window System Version 6.9.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 6.9
Build Operating System: FreeBSD 6.1 i386 [ELF]
Current Operating System: FreeBSD PCBSD.localhost 6.1-RELEASE-p2 FreeBSD 6.1-RELEASE-p2 #1: Thu Jul 6 11:31:02 PDT 2006 root@PCBSD.localhost:/usr/obj/usr/src/sys/PCBSDv1.2 i386
Build Date: 11 June 2006
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 11 19:25:29 2006
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) The directory "/usr/X11R6/lib/X11/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 2

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1130 card 0000,0000 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1131 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,244c card 0000,0000 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244a card 8086,4541 rev 03 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 8086,4541 rev 03 class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0112 card 1028,00e6 rev b2 class 03,00,00 hdr 00
(II) PCI: 02:03:0: chip 125d,1998 card 1028,00e6 rev 10 class 04,01,00 hdr 00
(II) PCI: 02:0f:0: chip 104c,ac42 card e000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:0f:1: chip 104c,ac42 card fffc,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:0f:2: chip 104c,8027 card 1028,00e6 rev 00 class 0c,00,10 hdr 80
(II) PCI: 04:00:0: chip 115d,0003 card 115d,1181 rev 03 class 02,00,00 hdr 80
(II) PCI: 04:00:1: chip 115d,0103 card 115d,1181 rev 03 class 07,00,02 hdr 80
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,16), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[1] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[2] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[3] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[4] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]
[5] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]
[6] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[7] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf4000000 - 0xfbffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (2:15:0), (2,4,4), BCTRL: 0x0700 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x0000e000 - 0x0000e087 (0x88) IX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 5: bridge is at (2:15:1), (2,5,5), BCTRL: 0x0740 (VGA_EN is cleared)
(--) PCI:*(1:0:0) nVidia Corporation NV11 [GeForce2 Go] rev 178, Mem @ 0xfc000000/24, 0xe0000000/27
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe8000000 from 0xefffffff to 0xe7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf8ff8000 - 0xf8ffffff (0x8000) MX[B]E
[1] -1 0 0xf8ffd800 - 0xf8ffdfff (0x800) MX[B]E
[2] -1 0 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]E
[3] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]EO
[4] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[5] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[6] -1 0 0x0000e080 - 0x0000e0ff (0x80) IX[B]E
[7] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
[8] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]E
[9] -1 0 0x0000dce0 - 0x0000dcff (0x20) IX[B]E
[10] -1 0 0x0000bfa0 - 0x0000bfbf (0x20) IX[B]E
(II) Inactive PCI resource ranges:
[0] -1 0 0xf4005000 - 0xf4005fff (0x1000) MX[B]E
[1] -1 0 0xf4004000 - 0xf4007fff (0x4000) MX[B]E
[2] -1 0 0xf4003000 - 0xf4003fff (0x1000) MX[B]E
[3] -1 0 0xf4002000 - 0xf4003fff (0x2000) MX[B]E
(II) PCI I/O resource overlap reduced 0x0000e000 from 0x0000e0ff to 0x0000e07f
(II) PCI Memory resource overlap reduced 0xf8ff8000 from 0xf8ffffff to 0xf8ffbfff
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]E
[1] -1 0 0xf8ffd800 - 0xf8ffdfff (0x800) MX[B]E
[2] -1 0 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]E
[3] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]EO
[4] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[5] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[6] -1 0 0x0000e080 - 0x0000e0ff (0x80) IX[B]E
[7] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]E
[8] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]E
[9] -1 0 0x0000dce0 - 0x0000dcff (0x20) IX[B]E
[10] -1 0 0x0000bfa0 - 0x0000bfbf (0x20) IX[B]E
(II) PCI Memory resource overlap reduced 0xf4004000 from 0xf4007fff to 0xf4004fff
(II) PCI Memory resource overlap reduced 0xf4002000 from 0xf4003fff to 0xf4002fff
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xf4005000 - 0xf4005fff (0x1000) MX[B]E
[1] -1 0 0xf4004000 - 0xf4004fff (0x1000) MX[B]E
[2] -1 0 0xf4003000 - 0xf4003fff (0x1000) MX[B]E
[3] -1 0 0xf4002000 - 0xf4002fff (0x1000) MX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]E
[6] -1 0 0xf8ffd800 - 0xf8ffdfff (0x800) MX[B]E
[7] -1 0 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]E
[8] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]EO
[9] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[10] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[11] -1 0 0xf4005000 - 0xf4005fff (0x1000) MX[B]E
[12] -1 0 0xf4004000 - 0xf4004fff (0x1000) MX[B]E
[13] -1 0 0xf4003000 - 0xf4003fff (0x1000) MX[B]E
[14] -1 0 0xf4002000 - 0xf4002fff (0x1000) MX[B]E
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000e080 - 0x0000e0ff (0x80) IX[B]E
[18] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]E
[19] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]E
[20] -1 0 0x0000dce0 - 0x0000dcff (0x20) IX[B]E
[21] -1 0 0x0000bfa0 - 0x0000bfbf (0x20) IX[B]E
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.8774
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.9.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "nv"
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro4 NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 280 NVS, Quadro4 380 XGL, Quadro NVS 50 PCI, GeForce4 448 Go,
GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
GeForce FX Go5200, GeForce FX Go5250, GeForce FX 5500,
GeForce FX 5100, GeForce FX Go5200 32M/64M, 0x0329,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, 0x032F,
GeForce FX 5900 Ultra, GeForce FX 5900, GeForce FX 5900XT,
GeForce FX 5950 Ultra, Quadro FX 700, GeForce FX 5900ZT,
Quadro FX 3000, GeForce FX 5700 Ultra, GeForce FX 5700,
GeForce FX 5700LE, GeForce FX 5700VE, 0x0345, GeForce FX Go5700,
GeForce FX Go5700, 0x0349, 0x034B, Quadro FX Go1000, Quadro FX 1100,
0x034F, GeForce 6800 Ultra, GeForce 6800, GeForce 6800 LE, 0x0043,
GeForce 6800 GT, GeForce 6800 GT, GeForce 6800 XT, 0x0049,
Quadro FX 4000, 0x00C0, GeForce 6800, GeForce 6800 LE,
GeForce 6800 XT, GeForce Go 6800, GeForce Go 6800 Ultra,
Quadro FX Go1400, Quadro FX 3450/4000 SDI, Quadro FX 1400,
GeForce 6600 GT, GeForce 6600, GeForce 6600 LE, 0x0143,
GeForce Go 6600, GeForce 6610 XL, GeForce Go 6600 TE/6200 TE,
GeForce 6700 XL, GeForce Go 6600, GeForce Go 6600 GT, 0x014B, 0x014C,
0x014D, Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, 0x016B, 0x016C,
0x016D, 0x016E, 0x0210, GeForce 6800, GeForce 6800 LE,
GeForce 6800 GT, 0x0220, GeForce 6200, 0x0222, 0x0228, 0x0090,
GeForce 7800 GTX, GeForce 7800 GT, 0x0093, 0x0094, GeForce Go 7800,
GeForce Go 7800 GTX, 0x009C, Quadro FX 4500, 0x009E
(II) Primary Device is: PCI 01:00:0
(--) Chipset GeForce2 Go found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]E
[6] -1 0 0xf8ffd800 - 0xf8ffdfff (0x800) MX[B]E
[7] -1 0 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]E
[8] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]EO
[9] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[10] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[11] -1 0 0xf4005000 - 0xf4005fff (0x1000) MX[B]E
[12] -1 0 0xf4004000 - 0xf4004fff (0x1000) MX[B]E
[13] -1 0 0xf4003000 - 0xf4003fff (0x1000) MX[B]E
[14] -1 0 0xf4002000 - 0xf4002fff (0x1000) MX[B]E
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000e080 - 0x0000e0ff (0x80) IX[B]E
[18] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]E
[19] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]E
[20] -1 0 0x0000dce0 - 0x0000dcff (0x20) IX[B]E
[21] -1 0 0x0000bfa0 - 0x0000bfbf (0x20) IX[B]E
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]E
[6] -1 0 0xf8ffd800 - 0xf8ffdfff (0x800) MX[B]E
[7] -1 0 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]E
[8] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]EO
[9] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[10] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[11] -1 0 0xf4005000 - 0xf4005fff (0x1000) MX[B]E
[12] -1 0 0xf4004000 - 0xf4004fff (0x1000) MX[B]E
[13] -1 0 0xf4003000 - 0xf4003fff (0x1000) MX[B]E
[14] -1 0 0xf4002000 - 0xf4002fff (0x1000) MX[B]E
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000e080 - 0x0000e0ff (0x80) IX[B]E
[21] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]E
[22] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]E
[23] -1 0 0x0000dce0 - 0x0000dcff (0x20) IX[B]E
[24] -1 0 0x0000bfa0 - 0x0000bfbf (0x20) IX[B]E
[25] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[26] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) NV(0): Initializing int10
(==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
(==) NV(0): Write-combining range (0xc0000,0x40000) was already clear
(II) NV(0): Primary V_BIOS segment is: 0xc000
(==) NV(0): Write-combining range (0x0,0x1000) was already clear
(--) NV(0): Chipset: "GeForce2 Go"
(==) NV(0): Depth 16, (==) framebuffer bpp 16
(==) NV(0): RGB weight 565
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xE0000000
(--) NV(0): MMIO registers at 0xFC000000
(==) NV(0): Write-combining range (0xfc000000,0x1000000) was already clear
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): ... none found
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: SHP Model: 138a Serial#: 0
(II) NV(0): Year: 1990 Week: 0
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: StandBy Suspend; RGB/Color Display
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.604 redY: 0.318 greenX: 0.296 greenY: 0.570
(II) NV(0): blueX: 0.138 blueY: 0.134 whiteX: 0.312 whiteY: 0.328
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 160.0 MHz Image Size: 304 x 228 mm
(II) NV(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2112 h_border: 0
(II) NV(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
(--) NV(0): CRTC 1 is currently programmed for DFP
(II) NV(0): Using DFP on CRTC 1
(--) NV(0): Panel size is 1600 x 1200
(II) NV(0): Panel is LVDS
(--) NV(0): VideoRAM: 32768 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): Monitor0: Using default hsync range of 75.76-77.04 kHz
(II) NV(0): Monitor0: Using default vrefresh range of 60.00-60.61 Hz
(II) NV(0): Clock range: 12.00 to 350.00 MHz
(II) NV(0): Not using default mode "640x350" (hsync out of range)
(II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x400" (hsync out of range)
(II) NV(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "720x400" (hsync out of range)
(II) NV(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x864" (hsync out of range)
(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1792x1344" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "1792x1344" (unknown reason)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1792x1344" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "1792x1344" (unknown reason)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1856x1392" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "1856x1392" (unknown reason)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1856x1392" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "1856x1392" (unknown reason)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1920x1440" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "1920x1440" (unknown reason)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1920x1440" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "1920x1440" (unknown reason)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "832x624" (hsync out of range)
(II) NV(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x768" (hsync out of range)
(II) NV(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1024" (hsync out of range)
(II) NV(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1920x1440" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "1920x1440" (unknown reason)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "2048x1536" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "2048x1536" (unknown reason)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "2048x1536" is larger than BIOS programmed panel size of 1600 x 1200. Removing.
(II) NV(0): Not using default mode "2048x1536" (unknown reason)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(WW) NV(0): Mode pool is empty
(EE) NV(0): No valid modes found
(==) NV(0): Write-combining range (0x0,0x1000) was already clear
(II) UnloadModule: "nv"
(II) UnloadModule: "ddc"
(II) Unloading /usr/X11R6/lib/modules/libddc.so
(II) UnloadModule: "i2c"
(II) Unloading /usr/X11R6/lib/modules/libi2c.so
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.so
(II) UnloadModule: "int10"
(II) Unloading /usr/X11R6/lib/modules/libint10.so
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

[dracheflieger]

Welcome back boudi,

I've read where the nVidia driver doesn't support the Go series as well as non-mobil chips. I also noticed that your log file shows that it's trying to ' LoadModule: "nv". You might try to down load the latest nVidia PBI driver (or alternately, you can install it from ports). After installing you can run the nvidia-xconfigure program and it will set up your XF86Config file and try to LoadModule: "nvidia" instead of nv. You will also have to rename your xorg.conf file or it will read that instead of the XF86Config. I don't know if it will help but it may fix all your ills.

[boudi]

and finally ... here is xorg.conf.new generated from the pimpmyvga.sh

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
Load "extmod"
Load "dri"
Load "glx"
Load "dbe"
Load "record"
Load "xtrap"
Load "type1"
Load "freetype"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
### Available Driver options are:-
### Values: [i]: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # [i]
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # [i]
#Option "FPScale" # [<bool>]
#Option "FPTweak" # [i]
Identifier "Card0"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "NV11 [GeForce2 Go]"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1600x1200"
EndSubSection
EndSection

[antik]

and finally ... here is xorg.conf.new generated from the pimpmyvga.sh


Actually pimpmyvga.sh creates xorg.conf.temp or xorg.conf.detected file not xorg.conf.new one.

[boudi]

You might try to down load the latest nVidia PBI driver (or alternately, you can install it from ports). After installing you can run the nvidia-xconfigure program and it will set up your XF86Config file and try to LoadModule: "nvidia" instead of nv.

I tried that with no luck. ':('

[boudi]

Actually pimpmyvga.sh creates xorg.conf.temp or xorg.conf.detected file not xorg.conf.new one.

I tried both .detected and .temp with no luck
still trying ':?'
boudi

In case this helps
I'm working on a Dell Inspiron 8100
the default XF86conf file has Modes "1600x1200" and "1280x1024" under the all the Displays, but I don't have the option of 1600x1200 when I'm trying to adjust the display settings in KDE. Could the fact that PCBSD is unable to find a specfic display for my laptop's LCD be part of the problem?

[TerryP]

Could the "hsync out of range" have any thing to do with it?

(II) NV(0): Monitor0: Using default hsync range of 75.76-77.04 kHz
(II) NV(0): Monitor0: Using default vrefresh range of 60.00-60.61 Hz
(II) NV(0): Clock range: 12.00 to 350.00 MHz
(II) NV(0): Not using default mode "640x350" (hsync out of range)
(II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x400" (hsync out of range)
Allot of resolutions



Fuuy I've got to start learning binary/hex

[boudi]

Could the "hsync out of range" have any thing to do with it?

I adjussted my hsync rate to 24-93.8 and now it works fine. I found that hsync rate on a random SuSE config site. Good catch on the hsync error.
Thanks all
boudi